Zooz 800 Series Z-Wave Long Range XS Open | Close Sensor ZSE41 800LR

$22.95 $28.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

Simple Security

PRODUCT HIGHLIGHTS

  • Door/window monitoring: fast and reliable reports are sent to your Z-Wave hub whenever a door or window is open or closed
  • Extra small: slim and discreet enough to easily blend in with most frames and surfaces
  • Protective surface: coated with rubber oil to prevent corrosion and water leak damage
  • NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet (line of sight) if your hub supports Long Range
  • Outdoor installation: use the dedicated waterproof cover case for the ZSE41 (sold separately) to mount it anywhere outside
  • Power it with a single CR2032 battery
  • SmartStart for easier and safer pairing
  • Advanced settings to customize your sensor
  •  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH ALARM PANELS) 
  • 5-year extended warranty once registered and lifetime tech support
  • Check out ZSE41 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. You need a security-enabled controller to take full advantage of the product.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    How It Works

    The Zooz XS Sensor allows you to protect your home discreetly without breaking the bank. When connected to your Z-Wave hub, it will tell you exactly if and when a door or window has been opened.

    Attach it to a kitchen cabinet to make sure it's not accessed when it's not supposed to be. Put it on a drawer to safeguard your valuables. Receive instant text/email notifications on your smart phone or laptop so that you’re always kept in the loop, no matter where you are.

    Use the sensor to speak to other Z-Wave security devices, like triggering a Z-Wave alarm siren when the backdoor is opened unexpectedly. With features like low-battery alerts and 700 series Z-Wave chip for faster and safer connectivity, the XS Open | Close Sensor is as dependable as it gets.

    Installation

    To add the XS Open | Close Sensor to your Z-Wave network:

    1. Use a small flat screwdriver to gently open the sensor’s cover and access the battery. Pull the tab from under the battery to activate the sensor. Don’t close the cover just yet. The LED indicator will start blinking for around 10 seconds once the
    sensor is powered.
    2. Bring the sensor to the location where you plan to mount it at.
    3. Put your Z-Wave gateway controller into inclusion/pairing mode.
    4. Scan the QR code or enter the PIN code located on the back of the battery cover if your hub supports SmartStart S2 inclusion.
    5. Click the Z-Wave button on the sensor 3 TIMES QUICKLY. The LED indicator will flash quickly.
    6. A new open/close (door/window) sensor will appear on your controller’s device list.

    After successfully including the sensor into your Z-Wave network, use the supplied adhesive tape to mount it so that the sensor is fixed to the moving part and the magnet is fixed to the window / door frame. 

    If installing the sensor outdoors, please make sure to insert the sensor to the waterproof case (sold separately) and mount the case using the supplied mounting screws.

    Zooz 700 Series Z-Wave Plus XS Open | Close Sensor ZSE41 Installation
    NOTE: Make sure the orientation marks are facing each other, and the gap between sensor and magnet does NOT exceed 0.25” when the device is in the closed position.

    GET THE WATERPROOF CASE HERE:

    Waterproof case for the Zooz 700 Series Z-Wave Plus Open | Close Sensor

    WORKS WITH

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

      • Z-Wave Region: US, CA, MX / AU, NZ / EU/UK - choose your region before adding this product to cart
      • Z-Wave Chip: 800 series
      • Power: 1 CR2032 battery (included)
      • Magnet to sensor max gap: 0.25"
      • Wireless Range: Up to 150 feet line of sight (up to 1300 feet for Long Range)
      • Operating Temperature: 32° – 104° F
      • Dimensions: 1.9” x 1” x 0.3” (magnet: 1.26" x 0.3" x 0.3")
      • Installation: Indoor or outdoor use with waterproof case (sold separately)

    RESOURCES 

    Zooz 800 Series Z-Wave Plus XS Open | Close Sensor ZSE41 Users Manual (PDF)

    ZSE41 Frequently Asked Questions

    Advanced Settings

    Support Portal


    Next Previous

    Customer Reviews

    Based on 31 reviews
    84%
    (26)
    10%
    (3)
    3%
    (1)
    0%
    (0)
    3%
    (1)
    M
    Mike
    Works great

    The device is immediate to update in home assistant when using the zooz 800 usb. I ordered 11 and they all arrived in a single package very quickly. All items pairs easily. Only 2 were joined unsecured due to distance. Very old house with plaster, metal lath, and concrete blocks used for additions. All things considered these perform surprisingly well for my needs. Looks great and installed easy.

    Only one issue. The PIN and QR are on the back of the device. This is covered by the 3m pad used to adhere it to the surface. I noticed this and made labels with the QR code and pin that were stuck inside the face plate. Other than that it s great design. Moving the QR and pin in case they’re needed later would be a good idea. That or take really good notes first lol

    P
    Philip Nunn
    Amazing open/close sensor!

    I replaced a Ring alarm system with my own setup using SmartThings. I utilized the ZSE41 for all open/close sensors and couldn't be more pleased. Great quality, sleek, thin design, and the battery lasts for months. Hands down the best open/close sensors I've used to date!

    R
    Rick
    Great for baby gate!

    I mounted this on a baby gate just to help me make sure we remembered to close it. Small and inconspicuous. Very easy to add to Home Assistant.

    If you're using it like this, ust make sure the magnet can't be popped off and, you know, ingested.

    A
    Alec
    Most attractive open/closed sensor I've ever seen - works beautifully!

    I've always been a fan of the Quirky Tripper (Zigbee sensor which is no longer made) because of its relatively small size and sleek design. Although I have a very strong Zigbee mesh with many repeaters, there's a spot at the top of my basement stairs which just wouldn't work. One in 20 times when I closed the door, it wouldn't register the close, which meant that the basement lights wouldn't go on when I opened the door the next time (or, more importantly, when my husband opened the door). I decided to try with a z-wave open/close sensor (I also have a very strong Z-wave mesh). When I unboxed this I was so impressed with how small and elegant it is - the first time I've liked the design of an open/close sensor more than my beloved Trippers. Install was very easy - very clear instructions! I love the perfectly-sized 3m strips. It's been up for 1 1/2 weeks and so far not a single dropped 'close'. I love this little device and if any of my other sensors fail down the road this will be my go to!

    D
    Damo
    Compact, Quick, Slim

    I've been using these sensors on all my doors for the last 5 months and its been consistently accurate and quick to report when they are opened and/or left open.