Zooz Z-Wave Long Range 700 Series Titan Water Valve Actuator ZAC36 LR

$149.95 $179.95

| /

Smarter Flood Prevention

PRODUCT HIGHLIGHTS

  • Automatic shut-off: connect the Titan valve actuator to your Z-Wave hub to close your water valve automatically anytime a leak is detected on any of the connecter water sensors
  • 0.5" - 1.25" ball valves only: please check your water valve for compatibility first
  • Check your valve first: you'll need 3" clearance to each side from the center of the valve, 1" clearance between the pipe and the wall, and at least 1.25" clearance between the valve handle and the pipe.
  • Works offline: a wired leak sensor probe is included to shut your water off even if the hub is offline or if you don't have a Z-Wave controller at all!
  • Indoor / outdoor: install the actuator outdoors if this is where your water main is.
  • Tool-free DIY installation: you'll be done in less than 5 minutes! Remember to install and calibrate the valve before testing it.
  • Extremely powerful: the Titan actuator auto-calibrates and tackles even the most stubborn valves
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • New 700 series Z-Wave chip: faster, more secure, and reliable wireless communication with greater range than ever 
  • SmartStart for easier and safer pairing
  • 5-year warranty and lifetime tech support
  • Check out ZAC36 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, etc) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description. PLEASE NOTE: Wired Leak Sensor Probe is not included and cannot be connected to this version of the device. 

    How It Works

    Whether it’s an emergency or just for general safety and convenience, the Titan Water Valve Actuator offers an easy approach to smart home solutions. When connected to your Z-Wave hub, you can wirelessly and manually control your water valve from any mobile device.

    There’s even potential for advanced home automation, which means more protection. Link up this valve actuator with other Z-Wave devices, like a flood sensor, and the valve will automatically close when water is detected. Or simply attach the included wired offline detection probe for local monitoring even when the hub isn't available.

    The built-in Z-Wave signal repeater extends and strengthens the range of your Z-Wave network, ensuring fast and reliable connections thank to its 700 series chip technology.

    Save with Value Kits!

    $12 Savings: Titan Water Valve Actuator + 1 x Water Leak Sensor

    $24 Savings: Titan Water Valve Actuator + 2 x Water Leak Sensors

      PRO INSTALLATION NOW AVAILABLE!  

    Z-Box Smart Flood Prevention Kit Professional Installation

    Click the image above to schedule a consultation with an installer for a 100% worry-free set-up!

    Installation

     NOTE: Don't test or turn the valve until it's fully installed and calibrated. Complete all of the installation steps before you begin testing. 

    You can install the valve actuator in a few minutes with no tools at all! Watch the video below for step-by-step instructions:


    If installing the Titan actuator outdoors, please lock the Z-Wave button to prevent water damage to the device. Hold the Z-Wave button until 3 beeps sound, the tap the Z-Wave button 3 times. You can unlock the Z-Wave button by performing the same steps if you need to use it for programming purposes in the future.

    WORKS WITH

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

      • Valve Requirements: 0.5" - 1.25" ball valves only
      • Installation Requirements: 3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall.
      • Water Leak Probe Length: 4.75 feet
      • Z-Wave Region: US / CA / MX
      • Z-Wave Chip: 700 series
      • Power: 12 V DC (1 A) power supply (included)
      • Power Cord Length: 9.5 feet
      • Temperature Sensor Range: -40° – 257° F
      • Sound Indicator: up to 85 dB
      • Wireless Range: Up to 400 feet line of sight (up to 130 feet indoors)
      • Operating Temperature: 14° – 122° F
      • Dimensions: 5.5" long x 2.25" wide x 5" tall
      • Installation: Indoor or outdoor use (IP66)

    RESOURCES 

    Zooz Titan Water Valve Actuator ZAC36 Quick Start Guide (PDF)

    ZAC36 Frequently Asked Questions

    Advanced Settings

    Support Portal


    Next

    Customer Reviews

    Based on 37 reviews
    95%
    (35)
    5%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    John Flotterud
    Titan Water Valve

    Easy to install and setup in Hubitat and integrate into the safety monitor. I did need to move my hub closer for the initial pairing but overall was easier than I expected to get installed and working.

    B
    B Wilson
    Great upgrade from the old zooz valve shutoff

    I was happy the sale took place so I could replace my water valve shutoff with a titan. No more guessing if it will actually work!

    N
    N.K.
    Quite impressed, instructions could be a bit better, though.

    I really like having the peace of mind of having this water valve. It also comes with it's own built in water sensor. I also plan on adding more water sensors to various areas of my house.

    I found it quite easy to install. It still worked on PEX pipe and you can adjust the clamps up and down to get around the pipe fittings around the valve.

    I compared this with Moen Flow. I went with this one since people were complaining how the moen one would randomly shut off at inopportune times. I also went with this one since I didn't want to mess with plumbing. There is no way for it to monitor the flow rate, unlike the Moen Flow, however. I don't know if it would be that helpful anyway, since my RO system tends to trickle run to fill the tank and it might "look" like a leak.

    I did struggle a bit at first. You have to read the instructions VERY carefully! There is a small ring that goes between the ball valve and the actuator and it would not work on my ball valve handle without this ring. I also was disappointed that the printed instructions did not indicate how to troubleshoot pairing. I needed to search online how to do it. Once it was paired, though, it worked well. Hopefully it will be worth it's cost! Definitely helpful for peace of mind.

    P
    Patrick Harlan
    It was easy to install

    This installed easily and connected to my HA system easily. I used to have a dome unit, but it failed after 4 years.

    P
    Pete White
    Worth Every Penny

    Got this after a somewhat expensive water heater failure soaked the basement. I wasn't sure it would work due to having CPVC piping as well as a hard to turn shutoff valve. It was easy to install and immediately did its thing during the initial setup. Added a Zwave leak sensor to the base of the new water heater seeing as it's across the room from the house shutoff valve. Dribbled a bit of water on the floor at the sensor and within seconds it shut off the water supply. I'll sleep easier knowing that this has me covered.