$27.95 $39.99
| /
NOTE: Z-Wave gateway controller required - sold separately.*Your hub needs to support advanced settings for this feature to be available.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
Please follow the manual guidelines and diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.
Check for neutral wires BEFORE purchasing. One white wire from a 14-3 romex is NOT a neutral. Ask us if you're not sure about the wiring, we'll help quickly!
How to include the 800 Series On / Off switch to your smart home hub?
1. Make sure the switch is installed within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the toggle up 3 times quickly to finalize the inclusion process
4. A new on/off switch will appear on your controller's device list
NOTE: Follow an appropriate diagram from the manual to wire the switch in a 3-way or 4-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Download the Manual for Zooz 800 Series Z-Wave Long Range S2 On / Off Toggle Switch ZEN73 (PDF)
These switches are great, work flawlessly and including them in the smartthings hub and building a zwave network was very easy.
I have been replacing failing X-10 switches that I've used to automate my home when I first purchased it. The Zooz switches work well, have a pleasant, soft blue glow for easy locating in the dark and are easy to link to my home automation computer. I love these switches and hope to purchase more to replace my old X-10 switches in the future.
Replaced a GE z-wave switch with this one. GE switch would not register on/off in Hubitat hub when manually used (at one point it did but it stopped). This was a problem as there are rules which trigger when the switch is manually turned on or off. The Zooz switch resolved the issue, and in every aspect, is a much better switch. The switch has a smaller profile than the GE one and, pairing and installation was effortless. 5 stars!
So far, so good
I’ve had some Zen23 switches and some GE/Jasco switches for about 5 years. I’ve had no failures with the Zen23s but now 3 of my GE switches are failing. Zooz is better. Going to replace my GEs with Zen73s.