Zooz 800 Series Z-Wave Long Range XS Open | Close Sensor ZSE41 800LR

$22.95 $28.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

Simple Security


  • Door/window monitoring: fast and reliable reports are sent to your Z-Wave hub whenever a door or window is open or closed
  • Extra small: slim and discreet enough to easily blend in with most frames and surfaces
  • Protective surface: coated with rubber oil to prevent corrosion and water leak damage
  • NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet (line of sight) if your hub supports Long Range
  • Outdoor installation: use the dedicated waterproof cover case for the ZSE41 (sold separately) to mount it anywhere outside
  • Power it with a single CR2032 battery (Energizer, Panasonic, or Maxell recommended. Do NOT use Duracell batteries due to the extra bitter coating that prevents contact.)
  • SmartStart for easier and safer pairing
  • Advanced settings to customize your sensor
  • 5-year extended warranty once registered and lifetime tech support
  • Check out ZSE41 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. You need a security-enabled controller to take full advantage of the product.


    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    How It Works

    The Zooz XS Sensor allows you to protect your home discreetly without breaking the bank. When connected to your Z-Wave hub, it will tell you exactly if and when a door or window has been opened.

    Attach it to a kitchen cabinet to make sure it's not accessed when it's not supposed to be. Put it on a drawer to safeguard your valuables. Receive instant text/email notifications on your smart phone or laptop so that you’re always kept in the loop, no matter where you are.

    Use the sensor to speak to other Z-Wave security devices, like triggering a Z-Wave alarm siren when the backdoor is opened unexpectedly. With features like low-battery alerts and 700 series Z-Wave chip for faster and safer connectivity, the XS Open | Close Sensor is as dependable as it gets.


    To add the XS Open | Close Sensor to your Z-Wave network:

    1. Use a small flat screwdriver to gently open the sensor’s cover and access the battery. Pull the tab from under the battery to activate the sensor. Don’t close the cover just yet. The LED indicator will start blinking for around 10 seconds once the
    sensor is powered.
    2. Bring the sensor to the location where you plan to mount it at.
    3. Put your Z-Wave gateway controller into inclusion/pairing mode.
    4. Scan the QR code or enter the PIN code located on the back of the battery cover if your hub supports SmartStart S2 inclusion.
    5. Click the Z-Wave button on the sensor 3 TIMES QUICKLY. The LED indicator will flash quickly.
    6. A new open/close (door/window) sensor will appear on your controller’s device list.

    After successfully including the sensor into your Z-Wave network, use the supplied adhesive tape to mount it so that the sensor is fixed to the moving part and the magnet is fixed to the window / door frame. 

    If installing the sensor outdoors, please make sure to insert the sensor to the waterproof case (sold separately) and mount the case using the supplied mounting screws.

    Zooz 700 Series Z-Wave Plus XS Open | Close Sensor ZSE41 Installation
    NOTE: Make sure the orientation marks are facing each other, and the gap between sensor and magnet does NOT exceed 0.25” when the device is in the closed position.


    Waterproof case for the Zooz 700 Series Z-Wave Plus Open | Close Sensor


    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


      • Z-Wave Region: US, CA, MX / AU, NZ / EU/UK - choose your region before adding this product to cart
      • Z-Wave Chip: 800 series
      • Power: 1 CR2032 battery (included)
      • Magnet to sensor max gap: 0.25"
      • Wireless Range: Up to 150 feet line of sight (up to 1300 feet for Long Range)
      • Operating Temperature: 32° – 104° F
      • Dimensions: 1.9” x 1” x 0.3” (magnet: 1.26" x 0.3" x 0.3")
      • Installation: Indoor or outdoor use with waterproof case (sold separately)


    Zooz 800 Series Z-Wave Plus XS Open | Close Sensor ZSE41 Users Manual (PDF)

    ZSE41 Frequently Asked Questions

    Advanced Settings

    Support Portal


    Customer Reviews

    Based on 44 reviews
    Jeffrey Sauser
    Review of ZSE41

    Replaced two older sensors on my basement windows with this sensor, and they are working just great!

    Jeff C
    Zooz ZSE41 800LR

    Excellent open/close sensor. The fact that it uses the 2032 battery is a plus.

    Patrick Masters
    I love TSH and Zooz <3

    Great products, easy setup and support and quick shipping.



    Tomas Karez
    Excellent inexpensive door sensor.

    I use these with home assistant. Once you have Z-Wave set up it is a piece of cake to use these to determine where the doors are open or not. Takes no more than just a couple of minutes to get it set up and working.