Zooz 800 Series Z-Wave Long Range Power Switch ZEN15 800LR for Heavy Duty Appliances

$34.95 $36.95

| /

Condition

More Power, More Control

Zooz Power Switch ZEN15 is a Z-Wave Plus product

Product highlights

  • The only Z-Wave plug that can handle high inrush current and works great with single devices such as fans, AC units, toaster ovens, or gas clothes dryers
  • Z-Wave and local on/off control of a single large (or small!) 110V appliance like AC units, sump pumps, humidifiers, or refrigerators
  • 800 Series Z-Wave chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • NEW: 45-degree angled plug so you can easily connect 2 Smart Switches to the same receptacle!
  • Customizable energy monitoring reports (W, kWh, A, and V)*
  • Recovers original on/off state after power outage
  • Test Z-Wave signal directly from this device (range indicated by a multi-color LED indicator)
  • Built to last with extra sturdy construction and the latest Z-Wave technology
  • Fast wireless communication with other Z-Wave devices and instant status reports to your hub
  • Smart LED notifications of high power consumption
  • Uses AES bank-grade encryption for wireless communication
  • Acts as a range extender for a more reliable Z-Wave mesh network
  • Quick installation with auto-inclusion feature 
  • 1-year warranty
  • Check out ZEN15 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your Z-Wave gateway needs to support advanced configuration to enable these features.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    Specifications

    • Z-Wave Region: US/CA/MX
    • Power: 110V, 60Hz
    • Maximum Load: 15A, 1800W, 1 HP
    • Z-Wave Range: Up to 150 feet (up to 1300 feet with Long Range)
    • Operating Temperature: 14° - 104°F (-10°- 40°C)
    • Installation and Use: Indoor use only
    • Dimensions: 20” (with cord) x 2.6” 1.1”
    • Weight: 10 oz.

      RESOURCES

      Zooz Z-Wave Plus Power Switch ZEN15 User Manual (PDF)

      ZEN15 Frequently Asked Questions

      Advanced Settings

      Support Portal

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • 2GIG (no advanced settings available)
      • ADT Pulse (no advanced settings available)
      • Almond (Securify)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Hubitat
      • InControl
      • Indigo
      • ISY994Zw
      • Jeedom
      • openHAB
      • Open Z-Wave
      • Piper (no power consumption info or advanced settings - on/off control only)
      • Ring (no power consumption info or advanced settings - on/off control only)
      • SmartThings (access the custom lua driver here for advanced functionality)
      • Staples Connect DLink (no power consumption info or advanced settings - on/off control only)
      • Wink and Wink 2 (no power consumption info or advanced settings - on/off control only)
      • Zipato ZipaTile Home Automation Controller

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        How It Works

        Serious power consumption calls for a serious, sturdy device: this Z-Wave Power Switch gives you reliable wireless Z-Wave control of a single large home appliance like refrigerators, microwaves, sump pumps, and window AC units. Connect the Switch with your Z-Wave gateway controller for remote monitoring of connected devices through your smart phone, tablet, or computer. 

        Create custom schedules and events to run a more efficient smart home. Schedule an AC unit to turn off and on at the same time every day for streamlined climate control. If your utility company has cheaper rates for off-peak hours, schedule your gas clothes dryer to run later in the evening. When your Z-Wave humidity sensor detects humidity levels that are too high or low, automatically trigger your humidifier or dehumidifier to get to work. During all these advanced smart home scenarios, see where your energy (and money!) are going with the Switch’s helpful energy monitoring feature: view the power consumption of a connected device in live mode or over time.

        The Power Switch is built with safety and reliability in mind. An LED indicator communicates Z-Wave signal strength and energy usage of the connected device. It’s also equipped with AES signal encryption and the latest enhancements of Z-Wave Plus like S2 Security: this means faster connectivity and longer range so you can access the more remote spaces of your smart home.

        Installation

        • Please read the manual in full before proceeding with the installation
        • Be sure the load you’d like to connect DOES NOT exceed 1800W, 15A, or 1 HP in power
        • DO NOT CONNECT THIS SWITCH TO 220V APPLIANCES – this will damage the device and may cause the connected appliance to malfunction
        • Do not connect to power strips or splitters; the ZEN15 is intended to control a single device within the specifications.The ZEN15 and all of our other smart plugs are designed to control and monitor a single device at a time. Multiple inductive loads with their rapid current changes happening at once, may damage the device or cause abnormal behavior.

        Before plugging any device or appliance into the Power Switch, plug the Switch into a standard grounded 110V receptacle. Press and release the Z-Wave button. Make sure the LED indicator turns on – this verifies the surge protector is activated.

        Once the Switch is powered and the surge protector activated, the device can now be included into your Z-Wave network. Be sure to include the Power Switch to your network BEFORE connecting any appliance to it.

        For Auto Inclusion, put your Z-Wave hub into inclusion/pairing mode (see your hub’s user manual for instructions). Plug the Power Switch into a grounded receptacle within direct range of your Z-Wave hub. Once included, the LED will start flashing blue, then turn solid blue (on) or pink (off). The Power Switch will appear as an on/off device on your hub’s device list.

        For Manual Inclusion, plug the Switch into a grounded receptacle within direct range of your Z-Wave hub. Put your hub into inclusion/pairing mode. Press and release the Z-Wave button 3 times quickly. When successfully included, the LED will flash blue and then turn solid blue (on) or pink (off). The new device will appear on your hub’s device list.

        Customer Reviews

        Based on 137 reviews
        98%
        (134)
        1%
        (2)
        1%
        (1)
        0%
        (0)
        0%
        (0)
        m
        mycheall hamlet
        Amazing! Just what the doctor ordered

        Need to control the AC in my EG4 battery bin on my bus. I wanted to control automatically through Home Assistant. With my Zwave hub is was a breeze to set up.

        T
        Tyler S
        Works Great!

        Paired easily to my Zooz controller with Zwave JS UI, which integrated into Home Assistant seamlessly. Responsive control, power monitoring works flawlessly, and the low profile plug head makes for clean, easy installation.

        H
        Heather
        Best Outlet Based Switch

        Bought a few more of these to supplement some older ZEN15 v.2 switches. These things are built like tanks, and in a nutshell if it's suitable to plug a big, power hungry device into the wall outlet to control and/or monitor power usage, these are the units to get. And yet they're not too bulky and have nice design features like the angled plug and properly sized cord. The LED's color indicator is also neat that it lets you check both range and power usage.

        It's nice to see the current model has incorporated the latest 800LR Z-Wave chipset.

        J
        Jake
        Great power monitor.

        Use it to monitor the power on my network rack. It works amazing to know how much power is being pulled and when there is a power issues. Also works great if I need to do a remote restart on the power.

        J
        James I
        Works great

        Using to measure the power draw of our washing machine to know when the cycle is done, works fantastic!