Zooz 800 Series Z-Wave Long Range Power Strip ZEN20 800LR

Safe & Smart Power Up

PRODUCT HIGHLIGHTS

• 5 Z-Wave Plus power outlets for wireless control of small appliances and electronics (total under 15 A resistive load)
  
• 2 USB ports for phone / tablet chargers report on / off status to the hub (NO Z-Wave control)
  
• 800 series chip: more range, faster signal, SmartStart inclusion + S2 security
  
• Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
• NEW in 800LR version: enhanced hardware protection against high inrush current from low-quality power adapters and other inductive loads
• Control each outlet individually or all at once via Z-Wave (individual local control from each button)
• Power monitoring in every outlet*
• Wall mounting and flat angled plug for cleaner installation
• Built-in signal repeater to strengthen Z-Wave network
• Remembers and restores on/off status after power outage
• Blue LED indicators signal status and communication in progress
• 5-year warranty extended warranty if registered + lifetime tech support
• Check out ZEN20 Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. *You need a controller which supports energy reports to take full advantage of the product. **Power reports for devices drawing 4W and above per channel; below 4W will not be reported.

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

• NEW: brand new product, as delivered by the factory
• OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
• REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual); hardware and firmware version may be different than the brand new device description
• USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

SPECIFICATIONS

WORKS WITH

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

RESOURCES 

Zooz Z-Wave Plus Power Strip ZEN20 800LR Manual (PDF)

ZEN20 Frequently Asked Questions

Advanced Settings

Support Portal

HOW IT WORKS

The Zooz Z-Wave Plus Power Strip is the smartest way to power up your everyday devices, like your laptop, lighting, entertainment, and audio equipment. Remotely check if a device is powered and switch it on or off with your mobile device. Automatically turn on all or one of the the power strip outlets at a specific time every day based on your schedule and needs.

Create events that allow it to communicate with other Z-Wave devices — open the front door, turn off the power strip. Use the built-in timer to automatically turn designated outlets off after a fixed amount of time for added parental control. Monitor power use and optimize energy draw in your home or office.

INSTALLATION

Be sure to check whether your Z-Wave hub supports the required command classes (please refer to your user manual for specifics).

Plug the power strip into any grounded 110V receptacle. Before connecting any devices, turn the power switch on and make sure the blue LED indicators light up when you click the buttons assigned to each outlet.

Next, include the power strip into your Z-Wave system:

1. Plug the power strip into a grounded 110V receptacle within the range of your Z-Wave network.
2. Put your hub in inclusion mode.
3. Press and release the CH1 power button on the power strip 3 times very quickly.
4. The newly added strip should appear on your controller’s device list.

To exclude the power strip from your network at any time, follow the steps above but with your controller in exclusion mode.

For more instructions on association and advanced software capabilities, please refer to your user manual.