$28.95 $33.99
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings for you to take advantage of this feature.
Here is a simplified overview of the recommended models for the most common scenarios (read the full guide above for more details):
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
You can now order a custom engraving for you smart switch paddles from our partners at Domotinc! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.
Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for CFL's and LED's, or 1800W (15A) for resistive load. Check your wiring first to confirm that you have all the following wires present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).
If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.
Here are some helpful wiring tips:
How to include the Zooz On / Off switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Tap the upper paddle of the switch 3 times quickly to finalize the inclusion process
4. A new on/off switch should appear on your controller's device list
NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Download the Manual for Zooz Z-Wave Long Range On / Off Switch ZEN71 800LR (PDF)
More wiring diagrams for 3-way and 4-way set-ups
Was able to get it hooked to SmartThings with custom driver
These work great! Really happy to pick them up and installation is similar to other models in this series. The nice thing about the paddles vs toggles is that the switch plate covers fit perfectly. The toggle switches are horrendous and leave a gap between the wall plates and the wall due to the design. Currently I’m in the process of swapping out all my smart toggles with paddles.
It works great! Very easy to setup with Hubitat hub.
Easy install. Though be aware if you're using it in a 3-way config, you need a dumb switch - it will not work with smart add-on switches.
Good quality and it just works!!