$28.95 $35.95
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for:
Before wiring the Double Relay in, check that the load does not exceed 500W for incandescent lights, 150W for LED's, 1/4 hp for fans and motors, or 5A for resistive load per relay. Examine all connections to verify that you have all the necessary wires available in the switch box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).
If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.
Here are some helpful wiring tips:
How to include the Double Relay to your smart home network?
1. Put your Z-Wave controller in inclusion/pairing mode
2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process (and scan the SmartStart security QR code or enter PIN if prompted)
3. Two new on/off switches and a master device should appear on your controller's device list
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Download the Manual for Zooz 700 Series Z-Wave Long Range Double Relay ZEN52 LR (PDF)
They are easy to wire up thanks to the easy to understand directions.
excellent product. easy to install and works as intended.
Nice item
4 Stars. I've purchased two of their double relay. Overall I think Zooz has the best prices for Z-wave products in general, but there is a limit to what you get.
One of the Zooz double relays stopped responding/working correctly and my light was stuck on (I could not change through commands (hubitat elevation) nor by the physical switch connected to the relay) I have disconnected the relay from the hub and cycled power through the breaker to fix it, but I have yet to reconnect that relay to my hub to run automations on that relay.
I have a second one that I've installed without any issues so far as well.
I still recommend this double relay for the size and price point.
I've owned my Zen52 for 15 months and the only thing I didn't like about the device was how slow it was to turn on from the light switch. I use toggle style switches and when I would flip the switch and it would turn on a second later. This was extremely noticeable considering I had used shelly relays and ZigBee relays which would turn on instantly using the same switches. It was also extremely annoying considering this was the only switch in my house that I physically interact with. After upgrading the firmware to v1.70 and setting parameter 12 to 0 I am happy to report my Zen52 now turns on and off instantly as expected. I also feel good knowing that if I change switch types I can change the settings later. Overall I am happy with my purchase.