Zooz 800 Series Z-Wave Long Range Dimmer ZEN72 800LR

$29.95 $39.99

| /

Color & Product Condition (See full condition details below)
White
Light Almond
Brown
Black
White - Open Box
White - Refurbished
White - Used (Final Sale - No Returns)

NEW 800 SERIES!

PRODUCT HIGHLIGHTS

  • Full brightness control of your lights, from the physical dimmer and via Z-Wave when added to your smart home hub (sold separately)
  • NEW 800 chip:  more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • What's the difference between the ZEN72 and the ZEN77 model? Read here!
  • Works with any dimmable LED bulb that accepts triac (forward-phase) dimmers up to 150 W total and with any incandescent bulbs up to 500 W. NOT COMPATIBLE WITH LUMINUS, LITHONIA, OR FEIT BULBS.
  • Direct 3-Way Solution: connects to an existing light switch for 2-point control, no add-on switch necessary! Wires just like the ZEN22 model. Neutral wire required, on/off control only from the secondary switch, use in 4-way installations only if you have direct connection to load and line in one box.
  • Replaceable paddles (almond, brown, and black paddle kits available)
  • Small profile (just 1.1" deep) to fit easily in a crowded or shallow box
  • Adjustable LED indicator: choose the color and brightness that works for you!
  • Scene control: multi-tap triggers available on select hubs*
  • Night Light Mode: press and hold the lower paddle when dimmer is off to turn the light on to low brightness
  • Double tap to full brightness: now fully adjustable double tap and single tap behavior*
  • Fully adjustable ramp rate*
  • Don't use with fan motors, halogen bulbs, transformers, receptacles, or tube lights!
  • Stronger signal repeater for a more reliable Z-Wave network 
  • NEW: YOU choose the color and brightness level of the LED indicator*
  • Fits a standard-size face plate for single and multi gang installations (face plate not included)
  • Lifetime tech support and 5-year extended warranty once registered
  • Check out Zooz Light Switches & Dimmers Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

      Not sure which dimmer model to choose?   Read a guide to Zooz switches here!

    Here is a simplified overview of the recommended dimmer models for the most common scenarios (read the full guide above for more details):

    Quick recommendations for Zooz smart dimmer models

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire jumper, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire jumper, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    CUSTOM ENGRAVING

    You can now order a custom engraving for you smart switch paddles from our partners at Domotinc! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.

    Zooz Switch with custom engraved label

    INSTALLATION

    Before beginning the installation process, make sure the load you are about to connect does not exceed 500W for incandescent lights or 150W for DIMMABLE LED. Do NOT use this dimmer to control fans, receptacles, or tube lights.
    Check your wiring first and confirm that you have all of the following present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).


    If you are not comfortable identifying the wiring and performing the installation, please consult a licensed electrician.

    Zooz ZEN22 dimmer works great as a single pole switch

    Here are some helpful installation tips:

    • Make sure the gang box you are about to install the switch at features a neutral wire - you will not be able to connect the ZEN72 switch properly without a neutral wire. Neutral is usually in a bundle of white wires NOT connected to your original mechanical switch.
    • Unlike your regular electrical switches, Z-Wave switches require particular wires to be connected exactly as indicated - line and load wires cannot be swapped as it often happens to the most experienced electricians.
    • Z-Wave dimmers will work best with incandescent and high-quality DIMMABLE LED bulbs with at least 15 Watts on load.

      How to include the 800 Series Dimmer switch to your smart home network?
      1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
      2. Put your Z-Wave controller in inclusion mode
      3. Tap the UPPER paddle of the switch 3 times very quickly to finalize the inclusion process
      4. A new dimmer (or multilevel switch) device will appear on your controller's device list

       NOTE:  Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches. This switch may wire differently in 3-way or 4-way installation than your other Zooz switch.

      SHOP COLOR PADDLES

      Shop dimmer replacement paddles for 700 Series dimmers

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • 2GIG (no advanced settings or scene control)
      • ADT Pulse (no advanced settings or scene control)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer
      • Homey (Zooz App for Homey)
      • Hubitat
      • InControl
      • Indigo
      • ISY994Zw
      • Open Z-Wave
      • Ring (no advanced settings or scene control)
      • SmartThings (register your product here to access the custom lua driver for advanced functionality)
      • Staples Connect DLink (no advanced settings - on/off control only)
      • Wink and Wink 2 (no advanced settings)

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. NOT SUPPORTED BY VIVINT.

        SPECIFICATIONS

        • Z-Wave Region: US/MX/CA
        • Power: 120 VAC, 60 Hz
        • Maximum Loads: 500W Incandescent, 150W LED
        • Range: Up to 200 feet line of sight, up to 1 mile with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
        • Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
        • Operating Temperature: 32-104° F (0-40° C)
        • Installation and Use: Indoor only

          RESOURCES

          Download the Manual for the Zooz 800 Series Z-Wave Log Range Dimmer ZEN72 800LR (PDF)

          More wiring diagrams for 3-way and 4-way set-ups

          Zooz Light Switches & Dimmers Frequently Asked Questions

          Advanced Settings

          Support Portal


          Next Previous

          Customer Reviews

          Based on 52 reviews
          88%
          (46)
          8%
          (4)
          4%
          (2)
          0%
          (0)
          0%
          (0)
          S
          Steven cook

          Zooz 800 Series Z-Wave Long Range Dimmer ZEN72 800LR

          N
          Nathan Sheldon
          Works Great. Very Configurable

          The ZEN72 800LR works great as a dimmer for our dining room LED chandelier. It paired with Home Assistant right away (version 2024.3.0 using the Z-Wave JS integration and add-on and HUSBZB-1 interface). The separate customizable dimming speeds for both button presses and Z-Wave commands is especially appreciated and the customizable ZEN72 LED indicator colors are also quite useful. And the price, even with shipping, is very competitive to other Z-Wave dimmers I found on Amazon, all with much fewer configuration options.

          J
          John Clinton
          They work great!

          These are fantastic. I have about 13 at the moment and ordering another 10! my only complaint is people unfamiliar with them don't know how to use them and usually just end up holding them down and setting the level to 0% instead of turning them off. It's very strange because it's not like you hold other buttons down in your life so why do it to my switches? haha other than that, flawless!

          R
          Ray
          Amazing Switches

          Love the easy to install, and good look and feel.

          M
          Matt
          Easy installation and excellent functionality

          Less than a year ago installed a number of no-neutral Leviton dimmers in my house and have had nothing but trouble with them since. I finally decided to replace one of them with a Zooz Zen72 as a trial. The Zooz switch is better in almost every way. Installation was super easy. The dimmer came with wire labels and a jumper wire for neutral, which I thought was a nice touch. Integrating the dimmer into Home Assistant took all of 30 seconds, and the level of customizability is the best of any smart switch I've used. Response time is almost instantaneous. The one feature of my Leviton dimmers I will miss is the dedicated rocker for dimming, but I may just need some more time to get used to long pressing the Zooz dimmer. I will definitely be replacing more of my old dimmers going forward.