Zooz 800 Series Z-Wave Long Range Motion Sensor ZSE18 800LR with Magnetic Base (Battery or USB Power)

$24.95

| /

Quick & Precise

The Zooz ZSE40 is a Z-Wave Plus certified device

PRODUCT HIGHLIGHTS

  • Instant motion detection that just works
  • Perfect for security monitoring and light automation
  • NEW 800 series Z-Wave chip: more range for reliable wireless communication
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH WINK OR ALARM PANELS)
  • The most flexible and dependable magnetic base
  • Battery or USB powered (cable sold separately) >> Use it as signal repeater when on USB (click here for instructions) - NOT A RECHARGEABLE BATTERY
  • 8 levels of motion sensitivity to choose from
  • Smart LED indicator >> Use it as a range test tool or turn it off completely straight from the device
  • SmartStart and S2 authenticated security
  • 5-year warranty (when registered) and lifetime tech support
  • Check out the ZSE18 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. You need a security-enabled controller to take full advantage of the product (including an S2 hub to benefit from S2 features).

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like a new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, the battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    GET ACCESSORIES

    10ft USB cable for the Zooz S2 Motion Sensor ZSE18   USB Power Adapter for the Zooz S2 Motion Sensor ZSE18   3ft USB Cable for the Zooz S2 Motion Sensor ZSE18

    HOW IT WORKS

    The new Zooz Motion Sensor is what happens when user feedback meets the latest advancements in Z-Wave technology. Not only is it a razor-sharp motion detector, it comes with a variety of new and time-tested features for ultimate convenience and reliability.

    For starters, AES signal encryption is now paired with the S2 authenticated security protocol for advanced protection. The device can be powered by either battery or micro USB - use one power source at a time. As an added bonus, the sensor acts as a signal repeater when connected to USB! Its visual range test tool, auto-inclusion option, and flexible magnetic mount make it super easy to add to your Z-Wave hub and very quick to install.

    Once included, use it in a variety of scenes and rules that could benefit from a precise motion sensor. Trigger a Z-Wave alarm if motion is detected unexpectedly in your home. Use movement to activate lights and thermostats instantly, and save a bunch on your energy bills in the process. If you’re a pet owner, no worries! Choose from a spectrum of 8 sensitivities to create the perfect Z-Wave companion for your household.

    INSTALLATION

    Before installing your Motion Sensor in its final location, you’ll need to add it to your Z-Wave network.

    To auto-include the device, put your Z-Wave hub into inclusion/pairing mode (see your hub’s manual for specifics – every brand is different!). Twist the sensor’s cover counter-clockwise to open it and access the battery. Remove the plastic battery tab from the battery compartment. This will activate the battery and put the device into inclusion mode. A new motion sensor should appear on your hub’s device list within 30 seconds.

    To include the device manually, make sure the battery is inserted correctly and put the hub into inclusion/pairing mode. Press and release the Z-Wave button 3 times quickly (the button is next to the battery compartment). Once included successfully, a new motion sensor will appear on your hub’s device list.

    You can use the included screw or adhesive tape to secure the magnetic base to any clean, dry, and flat surface. We find that it’s best to mount the device within 20 feet of a door (or your target area) and around 7 feet from the ground. After that, simply attach the sensor to the magnetic base and position it anyway you’d like.

    WORKS WITH

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

      • Z-Wave Region: US / CA / MX
      • Power: 1 CR123A battery (included) / Micro USB cable and power adapter (NOT INCLUDED)
      • Z-Wave Range: Up to 150 feet line of sight (or up to 1300 feet with Long Range enabled)
      • Operating Temperature: 32° - 104°F
      • Weight: 2.0 oz
      • Installation: Indoor Use Only

    RESOURCES 

    Zooz Z-Wave Long Range Motion Sensor ZSE18 800LR Manual (PDF)

    ZSE18 Frequently Asked Questions

    Advanced Settings

    Support Portal


    Next Previous

    Customer Reviews

    Based on 32 reviews
    88%
    (28)
    6%
    (2)
    6%
    (2)
    0%
    (0)
    0%
    (0)
    A
    A.V.
    Works great for months now

    I have a few of these around the house and most of them work always without issues. Occasionally the sensor will miss an automation, but 95% of the time it works and batteries last a long time. I would say at least 6 months.

    C
    Chait
    Works well, just what I needed

    Bought this to automate my office lights as I seem to keep forgetting to turn the lights off when I leave the room. Once I set this up, along with my Hubitat home automation hub, the problem is solved! No more wasted energy leaving the lights on.

    J
    Justin E
    My favority Z-Wave motion sensor!

    Bought one of these to use with Home Assistant. It paired easily. I love the magnetic mount, it allows for mounting it anywhere, even on the ceiling. The adjustable sensitivity is awesome, using that I was able to stop my lights from turning on every time my cats come downstairs :)

    B
    BT
    Works well

    Works great. I’m about to buy another one! Make sure that you read the reviews - someone had a tip for some settings that needed to be modified on my Vera controller to get it to work the way I wanted it to work.

    C
    Clay
    Great Motion Sensor in Small footprint

    Great footprint for small workout room.
    Works well with EZLO Secure and their echo system.
    Using Vera Scenes or EZLOGIC Meshbots (basically same thing) works great.