$29.95 $39.99
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
Here is a simplified overview of the recommended dimmer models for the most common scenarios (read the full guide above for more details):
You can now order a custom engraving for you smart switch paddles from our partners at Domotinc! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.
If you are not comfortable identifying the wiring and performing the installation, please consult a licensed electrician.
Here are some helpful installation tips:
How to include the 800 Series Dimmer switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion mode
3. Tap the UPPER paddle of the switch 3 times very quickly to finalize the inclusion process
4. A new dimmer (or multilevel switch) device will appear on your controller's device list
NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches. This switch may wire differently in 3-way or 4-way installation than your other Zooz switch.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. NOT SUPPORTED BY VIVINT.
Download the Manual for the Zooz 800 Series Z-Wave Log Range Dimmer ZEN72 800LR (PDF)
More wiring diagrams for 3-way and 4-way set-ups
These switches look nice and well made. I use them with Home Assistant, ZwaveJs, Node Red and a Zooz 800 Stick. In Home Assistant it was easy to connect and easy to set the many default settings for the switch. The added ability to set scenes to the switch works great. I have the switch set to turn on the lights in my bathroom to default of 80 percent, which is right for most of the time. Using a double tap on the on paddle turns the lights on 100% when I need a bit more light. By default, if the lights are off, you can hold down the off paddle to turn on Night Light mode. This is nice but I created a double tap scene that turns on Night Light Mode no matter if the lights are on or off. I also have one of these switches in my master bedroom. Here I turn the switches LED on bright red if either or both of my garage doors are open. I like the Zooz switches so much that I am replacing all my switches in my house with Zooz.
Was easy to pair with home assistant. Works fast and has been reliable. I have purchased several over the last few years.
Replaced entire house with these switches. Which have displayed consistent performance and are highly customizable. I tried Inovelli first, which I liked, but dimming performance varied quite a bit between switches. These are a huge improvement over the old zwave dimmers i had.
Installed a few of these and my wife even likes them. Installation of the first switch took a while until I referred to the instructions. Armed with instructions it took no time at all and the remainder were a breeze. Super easy to configure in HA and very responsive.
Great value ZWave switch/dimmer