Zooz 800 Series Z-Wave Long Range Power Strip ZEN20 800LR

$74.95 $79.95

| /

Safe & Smart Power Up

PRODUCT HIGHLIGHTS

  • 5 Z-Wave Plus power outlets for wireless control of small appliances and electronics (total under 15 A resistive load)
  • 2 USB ports for phone / tablet chargers report on / off status to the hub (NO Z-Wave control)
  • 800 series chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • NEW in 800LR version: enhanced hardware protection against high inrush current from low-quality power adapters and other inductive loads
  • Control each outlet individually or all at once via Z-Wave (individual local control from each button)
  • Power monitoring in every outlet*
  • Wall mounting and flat angled plug for cleaner installation
  • Built-in signal repeater to strengthen Z-Wave network
  • Remembers and restores on/off status after power outage
  • Blue LED indicators signal status and communication in progress
  • 5-year warranty extended warranty if registered + lifetime tech support
  • Check out ZEN20 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *You need a controller which supports energy reports to take full advantage of the product.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    SPECIFICATIONS

    • Z-Wave Region: US / CA / MX
    • Power: 110V
    • Maximum Load: 15Amps TOTAL between 5 outlets 
    • USB Charging Port Power: 5V up to 2.1 A
    • Cord: 2.5'
    • Range: Z-Wave Range: Up to 200 feet line of sight between the hub and the closest Z-Wave receiver module, up to 1300 feet with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
    • Installation and Use: Indoor Only
    • Operating Temperature: 32-104° F (0-40° C)
    • Dimensions: 11" x 2.5" x 1"
    • Weight: 13oz

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • ADT Pulse (no energy monitoring, on / off only)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Hubitat
      • openHAB
      • SmartThings Hub (work best with the custom lua driver for advanced functionality)
      • Wink and Wink 2 (no energy monitoring or advanced settings)

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        RESOURCES 

        Zooz Z-Wave Plus Power Strip ZEN20 800LR Manual (PDF)

        ZEN20 Frequently Asked Questions

        Advanced Settings

        Support Portal

        HOW IT WORKS

        The Zooz Z-Wave Plus Power Strip is the smartest way to power up your everyday devices, like your laptop, lighting, entertainment, and audio equipment. Remotely check if a device is powered and switch it on or off with your mobile device. Automatically turn on all or one of the the power strip outlets at a specific time every day based on your schedule and needs.

        Create events that allow it to communicate with other Z-Wave devices — open the front door, turn off the power strip. Use the built-in timer to automatically turn designated outlets off after a fixed amount of time for added parental control. Monitor power use and optimize energy draw in your home or office.

        INSTALLATION

        Be sure to check whether your Z-Wave hub supports the required command classes (please refer to your user manual for specifics).

        Plug the power strip into any grounded 110V receptacle. Before connecting any devices, turn the power switch on and make sure the blue LED indicators light up when you click the buttons assigned to each outlet.

        Next, include the power strip into your Z-Wave system:

        1. Plug the power strip into a grounded 110V receptacle within the range of your Z-Wave network.
        2. Put your hub in inclusion mode.
        3. Press and release the CH1 power button on the power strip 3 times very quickly.
        4. The newly added strip should appear on your controller’s device list.

        To exclude the power strip from your network at any time, follow the steps above but with your controller in exclusion mode.

        For more instructions on association and advanced software capabilities, please refer to your user manual.

        Customer Reviews

        Based on 42 reviews
        81%
        (34)
        17%
        (7)
        2%
        (1)
        0%
        (0)
        0%
        (0)
        R
        Raymond Goldstein
        It's so nice, I bought it twice

        This is my second Zooz Zen20 power strip. I bought the first one to replace a TP-Link Kasa Wi-Fi strip that kept dropping off the network. I've slowly been replacing all my Wi-Fi based IOT devices with Z-wave products from Zooz. I was very impressed with the build quality, and this first strip I bought is a rock-solid performer and has very fast response. Not a single issue. So, I bought this second one and it is also working great. I'll most likely get more of these and toss the old Wi-Fi stuff in the bin. Zooz quality is really top notch.

        P
        Pete White
        This thing is awesome!

        I have a wonky Dish Joey AP that needs rebooting at least every other day. Otherwise the upstairs TV gets really glitchy. Walk down to the basement, unplug the power from the Joey WAP, wait 10 seconds, plug it back in, walk back upstairs, wait for it all to resync. Every couple of days. Forget that.
        When I learned there was such a thing as this power strip, I wanted it yesterday. Of course it was out of stock. They just came back and I immediately bought one. Now that it's in Home Assistant, I have a scheduled job that reboots it in the wee hours every day. If things get glitchy, I can reboot it remotely with a click. I can also see how much power the different bricks that are plugged in are using. Greedy things can be turned off at night or when we leave and save energy.
        This thing really is awesome!

        V
        Vincenzo
        The best option for multiple device control from a single outlet

        I switched over to this Z-Wave power strip from a different brand's wi-fi model, and I was immediately able to notice the difference. The local control means much faster response times when using my app, and I even get power data to boot. Awesome!

        M
        Matthew Cooch
        Nice Power Strips

        I use one to power my Bambu X1C 3D printer, LED lights for it, and a Bento Box (air filter). Using Home Assistant allows me to turn on the Bento Box automatically while printing and 15 minutes after printing has finished. It is also tied to a smoke detector with the ZEN55 smoke detector bridge that will cut power if the smoke detector is activated.
        Power monitoring is a bonus.
        Was out of stock for a while but worth the wait.

        E
        Ellen
        Excited for v2

        Was using the V1 for several years until something bricked. Support said it was the aquarium pump I had plugged in. I wish there was a better list of what not to plug in.

        Either way I love all my zooz products and I am excited to get my new V2 and try it out.