Zooz 700 Series Z-Wave Long Range Double Relay ZEN52 LR

$28.95 $35.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

2 Relays in 1

PRODUCT HIGHLIGHTS

  • Save space and money with this smart double relay
  • Control 2 switches with 1 Z-Wave device: connect the double relay to 2 120V loads for independent smart control from your Z-Wave hub or wall switch
  • Great for double gang box switch automation or to add Z-Wave to a fan / light installation for individual control of the motor and bulbs
  • Wires behind the wall switches or at the fixture (if you don't have a neutral in the switch box)
  • 700 series Z-Wave: the latest tech for faster communication and better range
  • Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags (note that versions for regions outside of US/CA/MX don't come with LR)
  • SmartStart with S2 authenticated security with encrypted signal
  • Pigtail wires for easy installation
  • Smart bulb mode: disable manual and/or Z-Wave control and turn your smart bulbs on or off using wireless signal only
  • Scene control: 7 multi-tap triggers available for each relay (available on hubs that support multi-tap triggers*)
  • Multicolor LED indicator to guide you through the set-up process
  • Compatible with quality LED and incandescent bulbs (don't connect to ballast tube lights, switched receptacles, or fans over 1/4 hp; NOTE: FEIT bulbs are not recommended)
  • Acts as a Z-Wave extender: get more signal for your network with this 700 series repeater
  • 5-year extended warranty (once registered) and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.

    Z-WAVE FREQUENCY

    This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for:

    • US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products)
    • EU/UK: 868.42 MHz (used primarily in Europe) - no Z-Wave Long Range

    SPECIFICATIONS

    • Z-Wave Region: US/CA/MX, EU/UK (no Z-Wave Long Range)
    • Power: 120-240 VAC, 50/60 Hz
    • Maximum Loads: 500W incandescent, 150W LED bulbs, 5A resistive, 1/4 HP fan motors per channel
    • Z-Wave Range: Up to 300 feet line of sight (up to 1300 feet with Z-Wave Long Range)
    • Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

      RESOURCES

      Download the Manual for Zooz 700 Series Z-Wave Long Range Double Relay ZEN52 LR (PDF)

      Advanced Settings

      Support Portal

      WORKS WITH

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

      INSTALLATION

      Before wiring the Double Relay in, check that the load does not exceed 500W for incandescent lights, 150W for LED's, 1/4 hp for fans and motors, or 5A for resistive load per relay. Examine all connections to verify that you have all the necessary wires available in the switch box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

      If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

      Zooz ZEN52 Double Relay Single Pole Wiring Diagram

      Here are some helpful wiring tips:

        • Make sure the gang box you are about to install the switch has a neutral wire available - you will not be able to get the ZEN52 double relay to work without a neutral wire. If neutral is not available, you'll need to install the ZEN52 at the light fixture / in the fan canopy.
        • Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

      How to include the Double Relay to your smart home network?
      1. Put your Z-Wave controller in inclusion/pairing mode
      2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process (and scan the SmartStart security QR code or enter PIN if prompted)
      3. Two new on/off switches and a master device should appear on your controller's device list

      Customer Reviews

      Based on 31 reviews
      90%
      (28)
      3%
      (1)
      6%
      (2)
      0%
      (0)
      0%
      (0)
      J
      Justin
      Perfect for Ceiling Fans

      Picked up 1 for each of my upstairs ceiling fans, and install was a breeze both physically, and adding to Home Assistant, and now I have control over the fan and lights without needing to find the correct pull chain.

      M
      Martin
      Great companion to existing (& expensive) dimmer switches!

      Installed the double relay to control two light zones in my basement office inside a three gang box. The existing switches are of the 0-10V dimmer type and I didn’t want to replace these and associated wring with upgraded switches. After some wire hookup and cramming (good instruction), I was able to independently control on/off functionally of each of the two dimmers via HASS and various automation (through the Z-wave hub on the HASS server). Pairing/inclusion was not a problem and I have excellent connectivity and response. Indeed, I can’t control the dimming but I rarely use it and on/off control is more crucial for me. Recommend, I do.

      B
      BH
      Works well!

      Works very well after figuring out the wiring for my 3-way switches. Very compact for being able to control 2 different switches

      H
      Hector Acosta
      Works Great!!

      Fast shipment and good product.

      P
      Paul Larsen
      Great for Outdoor Lights and Fountains

      Installing these inside the PVC box with the receptacles is a clean and weather resistant way to control landscape lights and fountains.
      This is a much better way, in my opinion, than using the external dongle-style plug.
      It also seems to have better Z-Wave reception than the dongle.