Zooz 800 Series Z-Wave Long Range Smart Plug ZEN04 800LR

$27.95

| /

Product Condition (See full condition details below)

Small, fast, secure

PRODUCT HIGHLIGHTS

  • 🏆 Best Overall Z-Wave Smart Plug (2026): The Zooz ZEN04 800LR earned the #1 ranking in ThemisReviews' comparison of Z-Wave smart plugs, recognized for its Z-Wave Long Range capabilities, energy monitoring, and strong customer ratings. Read the full review
  • On/off Z-Wave control for floor lamps & small appliances (single device only; not intended to power more than 1 device. Do NOT use with power strips, transformers, humidifiers, fan motors over 1/3 HP, and other motor loads)
  • NEW 800 series Z-Wave chip: more range for reliable wireless communication
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • Power monitoring in live mode or over time*
  • SmartStart and S2 authenticated security 
  • Great for use with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances, go with the Power Switch instead; NOTE: FEIT bulbs are not recommended)
  • Status restore: the plug remembers and goes back to original state after power failure
  • Built-in signal repeater: keep your network fast and healthy
  • 5-year warranty (when registered) and lifetime tech support
  • Check out ZEN04 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and configuration for you to take advantage of this feature.

    SPECIFICATIONS

    • Region: US/CA/MX
    • Power: 120 VAC, 60 Hz
    • Maximum Loads: a single device with no more than 960W incandescent, 150W LED bulbs, 15A resistive, or 1/3 HP fan motors
    • Z-Wave Range: Up to 300 feet line of sight (or up to 1 mile with Long Range enabled)
    • Dimensions: 1.5" tall, 2.6" wide, 1.14" deep
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

      RESOURCES

      Download the Manual for the Zooz 800 Series Z-Wave Long Range Smart Plug ZEN04 800LR (PDF)

      ZEN04 Frequently Asked Questions

      Advanced Settings

      Support Portal

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • 2GIG (no advanced settings available)
      • ADT Pulse (no advanced settings available)
      • Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard list)
      • Ezlo Secure (select "Generic Z-Wave device" from the Device Wizard list)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
      • Homey (Zooz App for Homey)
      • Hubitat
      • Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security)
      • ISY994Zw
      • Jeedom
      • openHAB
      • Ring (no power consumption info or advanced settings - on/off control only)
      • SmartThings (access the Edge driver here)

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        How It Works

        Give your current small appliances the power of Z-Wave. While connected to your Z-Wave controller, enjoy wireless on/off control of your most crucial everyday devices such as lamps, TV/audio equipment, computers, and clocks (no heavy-duty appliances like washers or dryers).

        Know exactly how much power they're consuming at any given moment and over time. Create custom scenes designed around your schedule: it will work just as good by your bedside as for your holiday lights (indoors only).

        If your Z-Wave hub allows, the Smart Plug even lets you customize advanced configurations and parameter adjustments based on your preferences. This is a simple, low-cost electrical solution that will give you a smarter, more efficient home. 

        INSTALLATION

        Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load.

          How to include the Smart Plug to your smart home network?
          1. Insert the Smart Plug into a standard 120 V receptacle
          2. Put your Z-Wave controller in inclusion/pairing mode
          3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
          4. A new on/off device will appear on your hub's device list

          Customer Reviews

          Based on 193 reviews
          97%
          (187)
          2%
          (4)
          1%
          (1)
          1%
          (1)
          0%
          (0)
          B
          Bernd
          Nice little plug

          Hope to be able to use it as remote control plug and range extender.

          T
          Troy W.
          Zooz Smart Plug is as advertised

          I was able to easily add this to my Hubitat C5 and, using the Zooz Advanced Smart Plug driver, it reports energy usage and of course remote on/off operation of the plug itself. No more physically unplugging and replugging my smart t.v. every time it needs a full "reboot".

          C
          Chuck P.
          Z-Wave Devices

          I purchased a plug in device and two wall switches. So far the plug in device and one wall switch connected to my Home Assistant Green hub flawlessly. I am able to configure them to the schedule I need. I'll be buying more of them as I expand network.

          M
          ManoftheSea
          Can turn off the lamp from the other side of the house

          I have an office with a lamp that's a mild inconvenience to turn off when I'm a floor away. I plugged in the Zen04 smart plug, connected it to HASS with a ZWA-2 zwave controller, and now I can turn off the lamp from my phone. I walk 26 stairs fewer in a day!

          R
          Royce
          Works great with Home Assistant

          Easy to setup and works as expected! Will be buying more.