Zooz 800 Series Z-Wave Long Range Outdoor Smart Plug ZEN05 800LR

$23.95 $34.95

| /

Take Z-Wave Outdoors

PRODUCT HIGHLIGHTS

  • Single outlet with on/off Z-Wave control for outdoor Holiday lights, patio lights, small pumps or motors under 1/3 hp, and other appliances under 15 A resistive power (no dimming control)
  • Weather and impact-resistant housing withstands damp or wet conditions (IP65 rated)
  • NEW in 800LR version: energy monitoring with live power reports
  •  DO NOT SUBMERGE IN WATER:  Keep the plug at least a foot above ground when using it with an extension cord to avoid damage.
  • Angled plug for optimal outlet placement created with outdoor receptacles in mind
  • NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • SmartStart and S2 authenticated security for a truly secure smart home
  • LED indicator for easier inclusion and troubleshooting diagnostics
  • Compatible with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances; NOTE: FEIT bulbs are not recommended)
  • Built-in signal repeater: helps keep your network reliable, indoors and outdoors
  • 5-year warranty (when registered) and lifetime tech support
  • Check out ZEN05 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

    SPECIFICATIONS

    • Z-Wave Region: US / CA / MX
    • Power: 120 VAC, 60 Hz
    • Maximum Loads: 960W incandescent, 150W LED bulbs, 15A resistive, 1/3 HP fan motors
    • Z-Wave Range: Up to 150 feet line of sight (up to 1300 feet with Z-Wave Long Range)
    • Dimensions: 3.25" tall, 2.25" wide, 1.5" deep
    • Cord Length: 6.5"
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor or outdoor useIP65 rated

      RESOURCES

      Download the Manual for the Zooz 700 Series Z-Wave Plus Outdoor Smart Plug ZEN05 (PDF)

      ZEN05 Frequently Asked Questions

      Advanced Settings

      Support Portal

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • 2GIG (no advanced settings available)
      • ADT Pulse (no advanced settings available)
      • Ezlo Plus
      • Ezlo Secure
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
      • Hubitat
      • Indigo
      • ISY994Zw
      • Jeedom
      • openHAB
      • Ring (no advanced settings available)
      • SmartThings (install the custom lua driver for advanced functionality)
      • Vera

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        HOW IT WORKS

        The Outdoor Smart Plug enables wireless on/off control of lighting fixtures (no dimming capability) and small appliances. Add the plug to your hub and enjoy the convenience of scheduling or triggering your outdoor lights based on motion and other activity. Save energy and time with automated control. The plug is compatible with incandescent and high quality LED bulbs.

        The weather-resistant housing with a protective outlet cover safeguards the outlet from dirt and debris when not in use. The plug is angled to keep the second outlet in your receptacle open. The Outdoor Smart Plug is perfect for decorative or seasonal lighting, fountains and other outdoor plug-in appliances.

        Never worry if you accidentally left the lights on because you can turn them off remotely or program your lights to go on/off at specific times. You can also disable manual control from the button to make sure the device isn't activated accidentally.

        INSTALLATION

        Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load.

          How to include the Outdoor Smart Plug to your smart home network?
          1. Insert the Smart Plug into a standard 120 V receptacle
          2. Put your Z-Wave controller in inclusion/pairing mode
          3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
          4. A new on/off device will appear on your hub's device list

          Customer Reviews

          Based on 24 reviews
          100%
          (24)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          L
          Luke Heier
          Just Works!

          Had no trouble joining these to Home Assistant. Great configurations available, and they just work!

          D
          David Barnes
          Great Company

          The zooz 800 series has been rock solid. I have had no issues with performance and any error is due to user fumble. Great range, great with smart things - they just work.

          R
          Raymond Goldstein
          Simple to use, solid performance

          This was the easiest smart home device setup ever. Connected to Home Assistant easily and is very reliable. Happy I switched to Zooz Z-Wave

          D
          Daniel McKay
          Works flawlessly

          I use this outside during the holidays for Xmas lights and they have worked without fail for a couple years!

          N
          NS
          Easy peasy

          Easy install. Performs as expected