NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
Monitor your garage doors for the peace of mind you always wanted. Pair your sensor with the Zooz MultiRelay for a complete smart garage door solution. Always know what's happening on the main entry points to your home.
Watch for vibration on your window glass, sliding doors, and other surfaces to take action when needed. Set alerts for when you're not around so that you're quickly notified of any unusual activity.
This sensor features the highest Z-Wave security level and is backed by a 5-year manufacturer warranty which makes it a safe choice for your smart home monitoring needs.
To add the XS Tilt | Shock Sensor to your Z-Wave network:
1. Use the included triangle tool to carefully open the sensor’s cover and access the battery. Pull the tab from under the battery to activate the sensor. Don’t close the cover just yet. The LED indicator will start blinking for around 10 seconds once the
sensor is powered.
2. Bring the sensor to the location where you plan to mount it at.
3. Put your Z-Wave hub into inclusion/pairing mode.
4. Scan the QR code or enter the PIN code located inside of the battery cover if your hub supports SmartStart S2 inclusion.
5. Click the Z-Wave button on the sensor 3 TIMES QUICKLY. The LED indicator will flash quickly.
6. A new open/close and vibration sensor will appear on your controller’s device list.
After successfully including the sensor into your Z-Wave network, use the supplied adhesive tape to mount it.
If installing the sensor outdoors, please make sure to insert the sensor to the waterproof case (sold separately) and mount the case using the supplied mounting screws.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.