Zooz 800 Series Z-Wave Long Range Smart Plug ZEN04 800LR

Small, fast, secure

PRODUCT HIGHLIGHTS

• On/off Z-Wave control for floor lamps & small appliances (single device only; not intended to power more than 1 device. Do NOT use with power strips, transformers, humidifiers, fan motors over 1/3 HP, and other motor loads)
  
• NEW 800 series Z-Wave chip: more range for reliable wireless communication
  
• Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
• Power monitoring in live mode or over time*
• SmartStart and S2 authenticated security 
• Great for use with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances, go with the Power Switch instead; NOTE: FEIT bulbs are not recommended)
  
• Status restore: the plug remembers and goes back to original state after power failure
• Built-in signal repeater: keep your network fast and healthy
  
• 5-year warranty (when registered) and lifetime tech support
  
• Check out ZEN04 Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and configuration for you to take advantage of this feature.

SPECIFICATIONS

• Region: US/CA/MX
• Power: 120 VAC, 60 Hz
• Maximum Loads: a single device with no more than 960W incandescent, 150W LED bulbs, 15A resistive, or 1/3 HP fan motors
• Z-Wave Range: Up to 300 feet line of sight (or up to 1 mile with Long Range enabled)
• Dimensions: 1.5" tall, 2.6" wide, 1.14" deep
• Operating Temperature: 32-104° F (0-40° C)
  
• Installation: Indoor use only

RESOURCES

Download the Manual for the Zooz 800 Series Z-Wave Long Range Smart Plug ZEN04 800LR (PDF)

ZEN04 Frequently Asked Questions

Advanced Settings

Support Portal

WORKS WITH

• Z-Box Hub (recommended for Zooz products)
• 2GIG (no advanced settings available)
• ADT Pulse (no advanced settings available)
• Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard list)
  
• Ezlo Secure (select "Generic Z-Wave device" from the Device Wizard list)
• Fibaro Home Center 2
• Fibaro Home Center Lite
• Home Assistant (Z-Wave JS)
• HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
  
• Homey (Zooz App for Homey)
• Hubitat
• Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security)
  
• ISY994Zw
• Jeedom
• openHAB
• Ring (no power consumption info or advanced settings - on/off control only)
  
• SmartThings (access the Edge driver here)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

How It Works

Give your current small appliances the power of Z-Wave. While connected to your Z-Wave controller, enjoy wireless on/off control of your most crucial everyday devices such as lamps, TV/audio equipment, computers, and clocks (no heavy-duty appliances like washers or dryers).

Know exactly how much power they're consuming at any given moment and over time. Create custom scenes designed around your schedule: it will work just as good by your bedside as for your holiday lights (indoors only).

If your Z-Wave hub allows, the Smart Plug even lets you customize advanced configurations and parameter adjustments based on your preferences. This is a simple, low-cost electrical solution that will give you a smarter, more efficient home. 

INSTALLATION

Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load.

How to include the Smart Plug to your smart home network?
1. Insert the Smart Plug into a standard 120 V receptacle
2. Put your Z-Wave controller in inclusion/pairing mode
3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
4. A new on/off device will appear on your hub's device list