$29.95 $39.99
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
Here is a simplified overview of the recommended dimmer models for the most common scenarios (read the full guide above for more details):
You can now order a custom engraving for you smart switch paddles from our partners at Domotinc! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.
If you are not comfortable identifying the wiring and performing the installation, please consult a licensed electrician.
Here are some helpful installation tips:
How to include the 800 Series Dimmer switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion mode
3. Tap the UPPER paddle of the switch 3 times very quickly to finalize the inclusion process
4. A new dimmer (or multilevel switch) device will appear on your controller's device list
NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches. This switch may wire differently in 3-way or 4-way installation than your other Zooz switch.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. NOT SUPPORTED BY VIVINT.
Download the Manual for the Zooz 800 Series Z-Wave Log Range Dimmer ZEN72 800LR (PDF)
More wiring diagrams for 3-way and 4-way set-ups
This dimmer is sleek, easy to use, and customizable. It's everything that we have been looking for in a smart dimmer.
installation was easy and setup with home assistant went great!
I bought 80+ ZEN32 and ZEN72 switches to replace my existing Insteon switches. These switches look nice, are well made, and easy to include and configure in Home Assistant. There are a plethora of configuration settings for these devices in Home Assistant also including ramp rates, LED color and brightness, paddle behavior, and many other options. The switches can trigger a crazy amount of scenes too. I did have better luck including the switches using the QR code over using inclusion mode.
I installed this to include in a virtual 3-way configuration, and it works great. It was the right price and integrates well with Home Assistant.
I have some smart bulbs that lose their wifi every time the three way switch they are attached to turns off. I wanted a solution to let me use the manual switches while at the same time use the smart bulb functionality and these perform beautifully. Not only that but they were super simple to set up.