Home 700 Series Z-Wave Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR with 2 NO & NC Relays (20A, 10A)
Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR Packshot View
Zooz Z-Wave Plus 700 Series Universal Relay ZEN17 with 2 NO & NC Relays (20A, 10A) Input Types
Zooz Z-Wave Plus 700 Series Universal Relay ZEN17 with 2 NO & NC Relays (20A, 10A) Output Relays
Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR Safety and Security Benefits
Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR 800 Series Z-Wave Chip Benefits
Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR Packshot View
Zooz Z-Wave Plus 700 Series Universal Relay ZEN17 with 2 NO & NC Relays (20A, 10A) Input Types
Zooz Z-Wave Plus 700 Series Universal Relay ZEN17 with 2 NO & NC Relays (20A, 10A) Output Relays
Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR Safety and Security Benefits
Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR 800 Series Z-Wave Chip Benefits

Zooz 800 Series Z-Wave Long Range Universal Relay ZEN17 800LR with 2 NO & NC Relays (20A, 10A)

$35.95 $45.75

| /

Z-Wave Frequency
Product Condition (See full condition details below)

Get More Done

 

PRODUCT HIGHLIGHTS

  • 2 NO or NC relays to turn almost any load into a Z-Wave device (use either the normally closed or normally open relay for R1 and R2 at a time)
  • 2 Dry Contact or 12-24 V inputs to monitor HVAC systems, magnetic door sensors, or analog leak alarms (use either dry contact or 12-24 V input for R1 and R2 at a time, never apply voltage to the Sw terminals)
  • What's the difference between the ZEN17 and the ZEN16 model? Read here!
  • Automate up / down DC motors in screens, awnings, motorized blinds
  • Control sprinkler systems, commercial gates, garage doors (will NOT work with MyQ or other smart openers), pool pumps, whole-house fans, landscape lighting, and more
  • NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • SmartStart and S2 authenticated security for a truly secure smart home
  • Powered by USB C or 12-24 V (AC/DC): power supply NOT included (get it here), do NOT use laptop, tablet, or fast chargers to power the ZEN17! Use a small  5V max 1A power supply  only.
  • Use optional wall switches for manual control of connected devices
  • Wall-mount ready 
  • 5-year warranty and lifetime tech support
  • Check out ZEN17 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. 

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, USB cable, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, USB cable, etc) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    Z-WAVE FREQUENCY

    This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for:

    • US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products)
    • EU/UK: 868.42 MHz (used primarily in Europe)
    • AU/NZ: 921.4 MHz (used primarily in Australia and New Zealand) 

    SPECIFICATIONS

    • Z-Wave Frequency: US / CA / MX
    • Power: 12 - 24 V / USB C (Use a small  5V max 1A power supply  only).
    • Maximum Load: NO relays: 20 A, NC Relays: 10 A
    • Z-Wave Range: Up to 300 feet line of sight (up to 1300 feet with Z-Wave Long Range)
    • Installation and Use: Indoor Only
    • Operating Temperature: 32-104° F (0-40° C)
    • Dimensions: 4" x 2.5" x 1.5"

      USE CASES

      RESOURCES 

      Zooz Z-Wave Long Range 800 Series S2 Universal Relay Manual (PDF)

      ZEN17 Frequently Asked Questions

      Advanced Settings

      Support Portal

      Blog Post: How to Automate Your Yard with the Zooz Universal Relay

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • ADT Pulse (no advanced settings)
      • eedomus
      • Ezlo Plus
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Homey (Zooz App for Homey, NOTE: creating child devices for inputs is NOT  currently supported.)
      • Hubitat (2.2.6 release or higher)
      • Indigo
      • ISY
      • Jeedom
      • SmartThings (works best with the custom driver, installation instructions here)

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        GET POWER SUPPLY



        INSTALLATION

        Follow the appropriate diagram to wire the Universal Relay according to your application. If you don't see a diagram describing your set-up, please contact us to request help with the installation. Remember to always turn power off at the breaker before handling the wires. Never apply any voltage to the Sw input terminals!

        Once you've completed the wiring, power the Universal Relay up with a USB C and a standard power adapter (sold separately) or a direct connection to 12 / 24 V power source.

        Now add the Universal Relay to your hub: initiate inclusion (pairing mode) and click the Z-Wave button on the device 3 times quickly. The LED indicator will blink to indicate communication and stay on for 2 seconds to confirm inclusion.

        You’ll most likely see 3 new on/off devices in your app:

        2 channels for on/off control of each relay
        1 master node to control all relays at the same time and to access and adjust advanced settings in (if your hub supports parameter input)

        Customer Reviews

        Based on 42 reviews
        90%
        (38)
        7%
        (3)
        2%
        (1)
        0%
        (0)
        0%
        (0)
        C
        Cory B.
        Initial Setup Challenges, But Overall a Good Product

        Overall, this device works well and is great option for garage door control. I have mine wired up where I am using the two output relays via the NO contacts to trigger my garage door opener and the light on the door opener. The two inputs are used to sense the status open/close of the garage door and a man-door at the rear of my garage using a couple of NC reed switches. I used smart-start to include this device in my network. There are many configuration options for this device and it took a while to fully read through and understand what each option needed to be set to.

        I eventually configured everything as I needed for my scenario and everything seemed to be working perfectly. However, after a power outage (that I simulated) the two inputs would freeze with their last status. I would then try to re-interview the device, and the input entities completely disappeared. It would only recover after doing a complete exclusion and re-inclusion of the device. A factory reset didn't change this behavior. I found that if I used the manual inclusion method (not smart-start), regardless of if I chose to use Z-wave or Z-wave LR, that seemed to solve all my issues. I am running firmware 2.20. I can't say for sure if this is a problem with the device, Home Assistant, or my hub (I am using a ZST 39LR USB). Either way, the Zen17 seems to be working properly now as long as I include it in my network in that way. No significant complaints after my initial struggle.

        On the hardware side of things, if I could make one improvement, it would be to move the screws for the terminals on the opposite side. Since I mounted my Zen17 to a wall, I had to remove it every time I wanted to make a change to the wiring. It was a bit of an inconvenience to have to wire everything before I mounted it to the wall.

        M
        Michael
        Works, but the power jack is a bizarre choice

        Seriously, if you put a USB connector on a device, it should work properly with any normal USB cable plugged into it. If the device has specific power needs that require a specific charger that's not USB then *it should not use a USB jack*.

        Frankly this is just unacceptable.

        Assuming you power it correctly, it works pretty well :)

        T
        Tommy G.
        Great for garage door control and HVAC monitoring

        I have two of these - one 700 series and one 800 series - and both work flawlessly. One is hooked up to my garage door opener so that I can open and close it remotely. I also connected a wired door sensor (to the same unit) so I can know when the garage door is fully closed.

        The other ZEN17 is hooked up to my HVAC zone board so I can monitor whether my AC/heating is on stage 1 or stage 2. It's a small thing, but useful to me.

        My only gripe is that when certain settings are changed, the device has to be excluded/re-included for new sensors to show up. This might be a limitation of Z-Wave somehow for all I know... and since these are long-term installations, I only had to do the exclude/include process once on each one. Not a big deal, just a small hassle.

        Overall, I highly recommend these.

        S
        Silent F.
        Perfect for landscape lighting, and great range for those remote outdoor control locations.

        My 4th Zen17 LR unit!

        I've fallen for these amazing little relay boxes. All my low voltage outdoor equipment runs through these, and having smart automation of my lights via the ZEN17 is outstanding.

        While I loved the original, the 800LR series is the way to go. These work well with the extra distance and I haven't had a missed "on/off" event since swapping these in. Highly recommend

        Easy to set up, versitile in use cases. I've got 2 zones covering my back porch and stairs, colored lights at the back of the property, and 3 landscape light zones that make smart sense.

        N
        Norm
        Zen17

        I use my Zen17 to control the fresh air duct control on my HVAC. It works great. I monitor air quality inside my home and when it is less than ideal I turn on my bathroom exhaust fans and open up my fresh air duct using the 17. This pulls in fresh air in to improve air quality within my home.

        123

        You may also like