$29.95 $38.95
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
Download the Manual for Zooz 800 Series Z-Wave Long Range S2 Toggle Dimmer Switch ZEN74 800LR (PDF)
Zooz Light Switches & Dimmers Frequently Asked Questions
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Please follow the manual carefully and refer to the supplied diagrams when installing your Zooz switches. It's recommended that a licensed electrician performs the installation.
Check for neutral connections BEFORE you buy. A white wire from a 14-3 romex is usually NOT a neutral. Ask us if you're not sure what to look for, we'll be happy to help!
How to include the 800 Series S2 Toggle Dimmer to your smart home hub?
1. Make sure the dimmer is located within range of your Z-Wave network
2. Put your Z-Wave controller in inclusion/pairing mode
3. Toggle the dimmer up 3 times quickly to finalize the inclusion process
4. A new dimmer switch will appear on your controller's device list
NOTE: Follow an appropriate diagram from the manual to wire the dimmer in a 3-way or 4-way setting with a regular on/off electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.
I replaced 3 Z-Wave devices in my detached garage that just weren't communicating as well as I would have liked. Replacing them with 800LR from Zooz has answered the problems.
We have dark colored wall plates that came with matching screws. With these switches Zooz sends you shorter white screws you have to use. The issue is with the top wall cover/plate screw hole, the ground screw once tightened blocks the wall cover screw hole. You cannot use your normal length screw to attach the wall plate cover. This is a design flaw that needs to be fixed instead of the band-aid of shipping shorter white screws which might work for some. It's a physical design flaw and installation nightmare.
Hello,
The short screws are required for smart switches and they’re included in the box, If you’d like to use your own custom screws, you can always adjust the length using appropriate electrical tools. It’s recommended that any 120 V installation is performed by a licensed electrician who will have all of the necessary tools available to safely complete the installation.
Great switch, and outstanding customer service. It just has too many options in the configuration phase of installation. I wish there was a detailed chart with examples of what all those features do or what they're capable of. If you're unsure of wiring, their customer service was super fast to respond to my pictures with perfect guidance of what to do, even on the weekend!
800 LR version of the switch I have used before. 4/5 because Line and Load are separate so you have to test for them unlike the Enbrightens which have Line-Load detection so its faster to do a bunch. Shipping took forever - it always does.
I've started primarily using zooz devices because of the ease of setup, good documentation, and stability. This dimmer was no exception. Perfectly happy.