NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
Here is a simplified overview of the recommended dimmer models for the most common scenarios (read the full guide above for more details):
You can now order a custom engraving for you smart switch paddles from our partners at Domotinc! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.
If you are not comfortable identifying the wiring and performing the installation, please consult a licensed electrician.
Here are some helpful installation tips:
How to include the 800 Series Dimmer switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion mode
3. Tap the UPPER paddle of the switch 3 times very quickly to finalize the inclusion process
4. A new dimmer (or multilevel switch) device will appear on your controller's device list
NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches. This switch may wire differently in 3-way or 4-way installation than your other Zooz switch.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. NOT SUPPORTED BY VIVINT.