RGBW Control of your existing LED strip or DC lighting straight from your Z-Wave hub
- Use with 12-24 V DC LED strips and fixtures
- Can be manually controlled from an on/off or momentary wall switch
Power monitoring with W and kWh reported to your hub*
- Optional scene control*
- Equipped with S2 security and 128-bit encryption
- Built-in signal repeater for your Z-Wave mesh
- UL listed
- 1-year warranty & lifetime tech support
NOTE: Z-Wave gateway controller required - sold separately. *You need a controller which supports these advanced features to take full advantage of the product.
You'll need a 12-24 V DC power supply to power your LED strip and the Zooz RGBW Dimmer. Follow the diagram to connect the device to the power supply, your LED strip, and a wall switch (if needed) using a flat screwdriver and 16 AWG jumper wires.
Include your RGBW Dimmer using the SmartStart feature if your hub supports it by simply scanning the QR code located on the product and inputting the SDK code to confirm inclusion.
To manually include the product, put your hub into inclusion mode and click the Z-Wave button on the RGBW Dimmer 3 times quickly to finalize the process.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Z-Wave Signal Frequency: 908.42 MHz
Power: 12 / 24 V DC (Do NOT connect to 120 V AC)
Maximum Load: 10 A TOTAL between all channels (6 A per channel max); 120 W total at 12 V DC / 240 W total at 24 V DC
Range: Up to 150 feet line of sight
Installation and Use: Indoor Only
Operating Temperature: 32-104° F (0-40° C)
Dimensions: 1.67" x 1.5" x 0.7"
Weight: 2 oz
Zooz Z-Wave Plus S2 RGBW Dimmer ZEN31 Manual (PDF)