Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temp, Humidity, Light

$36.95 $39.95

| /

Condition

Quick MultiSensor

The Zooz ZSE40 is a Z-Wave Plus certified device

PRODUCT HIGHLIGHTS

  • Security monitoring: get motion alerts sent to your Z-Wave hub whenever activity is detected
  • Climate control: use this sensor to trigger your smart thermostat or humidifier based on regular precise temperature and humidity readings
  • Smart lighting: program your Z-Wave switches and smart bulbs to come on when the Q sensor reports motion and lux levels below your preferred set point
  • Power it with 2 CR 123A batteries (included) or a micro USB cable (sold separately, scroll down to shop)
  • Works as Z-Wave signal extender when powered via USB (do NOT pair the sensor on USB cable and then switch to batteries)
  • Z-Wave Plus chip with S2 security
  • SmartStart for easier and safer pairing
  • Advanced settings to customize your sensor
  •  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH WINK OR ALARM PANELS) 
  • Modern minimal design with a multi-directional mini mounting bracket
  • 1-year warranty

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    GET ACCESSORIES

    10ft USB cable for the Zooz S2 Motion Sensor ZSE18   USB Power Adapter for the Zooz S2 Motion Sensor ZSE18   3ft USB Cable for the Zooz S2 Motion Sensor ZSE18

     

    WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer
      • Hubitat
      • Indigo
      • openHAB
      • SmartThings Hub (register your product here to access the custom lua driver for advanced functionality)
      • VeraEdge Z-Wave Gateway Controller
      • VeraPlus Z-Wave Plus Advanced Home Controller

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

      • Z-Wave Frequency: 908.42 MHz (US)
      • Z-Wave Chip: 500 series
      • Power: 2 CR123A battery (included) / micro USB (cabled not included)
      • Wireless Range: Up to 100 feet line of sight
      • Motion Detection: Up to 20 feet
      • Humidity Detection Range: 0 – 100 %
      • Light Sensor Detection Range: 0 – 65535 lux
      • Operating Temperature: 32° – 104° F
      • Dimensions: 2.3” x 2.3” x 2.2”
      • Installation: Indoor Use Only

    RESOURCES 

    Zooz Z-Wave Plus Q Sensor ZSE11 Manual (PDF)

    Customer Reviews

    Based on 16 reviews Write a review

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods