Zooz 800 Series Z-Wave Long Range Wall Remote ZEN37 800LR (Battery Powered)

$27.95 $37.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

Smart Remote

This is a Z-Wave Long Range device  

PRODUCT HIGHLIGHTS

  • 4 smart buttons: control Z-Wave devices and activate scenes
  • Install anywhere: fits a standard decora switch box, sticks to a wall, or keeps handy on your night stand
  • No wires: this device is powered by a rechargeable battery for easier installation and low maintenance
  • Scene Control (select hubs only): run up to 24 scenes or control up to 24 devices with multi-tap triggers.*
  • NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • Smart bulb controlprogram the buttons to access your favorite smart bulb presets with just one click
  • Magnetic base: take the remote out whenever you need to use it like a traditional remote control and put it back on the base for easy access next time
  • Adjustable LED indicator: choose from 7 colors and 10 brightness levels
  • White (no other color available)
  • S2 authenticated security with SmartStart for the safest and most convenient way to add and manage your Z-Wave devices
  • OTA firmware updates for a future-proof device
  • Included accessories: mounting screws, adhesive tape, wall plate and switch box screws, triangle tool to open the remote, magnetic base, standard single-gang wall plate (white), and charging cable
  • 5-year warranty once registered and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

    INSTALLATION

    Simply use the provided triangle tool to open the Wall Remote, take out the pull-tabs from the battery slots to activate the device. Follow the instructions to integrate the device with your hub and install the base in a standard switch box or on any flat surface using the provided screw or adhesive tape. Finish the installation by attaching the wall plate to the magnetic base of the Wall Remote.

    How to add the Wall Remote to your Z-Wave home hub?

    1. Make sure the device is within range of your Z-Wave network
    2. Put your Z-Wave hub in inclusion/pairing mode
    3. Tap the top button of the Remote Switch 6 times quickly to finalize the inclusion process (or scan the QR code / enter the 4-digit DSK number printed on the back of the remote if using the new SmartStart method)
    4. A new remote control / button controller device will appear on your hub's device list

    WORKS WITH

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    ADD A SCREWLESS WALL PLATE  

    Shop a matching screwless wall plate for the ZEN37:

    Shop a single gang screwless plate for Zooz switches

    SPECIFICATIONS

    • Z-Wave Region: US / CA / MX
    • Power: 1 x LIR2032 rechargeable battery
    • Z-Wave Range: Up to 250 feet line of sight (and up to 1300 feet with Z-Wave Long Range)
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

      RESOURCES

      Download the manual for the 800 Series Z-Wave Long Range Wall Remote ZEN37 800LR (PDF)

      Advanced Settings

      Support Portal

      Customer Reviews

      Based on 20 reviews
      90%
      (18)
      10%
      (2)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      J
      Joseph Solomon
      ZEN37 Excellent Z-Wave device

      This battery powered switch was easy to set up with my smart things hub installed edge drivers paired and easily set up buttons I would recommend this switch we also has very good range Even the secure setup works seamlessly

      N
      Nick Mosher
      Works but the screws are too long

      The screws are too long to stick it to the wall. It causes the frame to not sit flush against the wall.

      H
      Howard F.
      Great wall mounted or handheld remote

      I've used the AEON Labs Minimote for years and are replacing them with the ZEN37 800LR and am using it with Home Assistant. The Zen37 allows for many more button combinations than the minimote. It also sends the remotes rechargeable battery status so it can be monitored in HA (which the minimote's did not do). My Z-wave controller is a Zooz ZAC93 800LR and I have configured the ZEN37 to use long range mode with no issues.

      B
      Bob Dunkle
      A great set of buttons

      I like buttons. I see them, I press them. So to have a Long Range version that perfectly works, means I can leave my house and carry my buttons. And being rechargeable is certainly a bonus!

      M
      Michael Bailey
      Easy to Setup and Configure with Home Assistant

      Great remote with handy magnetic wall plate. Replaced my light switch with this remote since my smart switch didn't play well with my smart light. Modified the Home Assistant blueprint that I had for my switch to create a template for future remotes.