Zooz 700 Series Z-Wave Plus S2 On / Off Wall Switch ZEN76

NEW 700 SERIES!

PRODUCT HIGHLIGHTS

• Control your lights from the switch and via Z-Wave (no dimming, get the dimmer here)
• Use with high-quality LED or incandescent lighting only: do NOT connect to switched receptacles, fans, or tube lights (NOTE: FEIT bulbs are not recommended)
• NEW in 700 series: slimmer switch to fit shallow and crowded boxes (just 1.1" deep); almond, brown, and black paddles available (basic version comes in white)
• NEW 700 chip: SmartStart inclusion, S2 security, more range than ever and super fast communication!
• Simple Direct 3-Way & 4-Way: Still no add-on and use it in larger set-ups for multi-point control. Wires like the ZEN26 model with quicker and easy installation guaranteed. (Neutral wire required)
• Scene Control on hubs that support multi-tap triggers*
  
• Program the LED indicator with custom color and brightness level that fits your needs*
• Smart range test mode: troubleshoot communication issues right from your switch
• Immediate on/off status reports
  
• S2 security for hacker-proof smart home
• Update firmware via OTA anytime in the future to keep your device up to date with latest technology
• Smart LED indicator makes pairing and set-up more intuitive (now control the LED mode with 6 clicks of any paddle!)
• Stronger signal extender for a more reliable Z-Wave mesh
• Restores status after power failure
  
• Use a standard-size wall plate for single gang installations (wall plate not included), Leviton plates work best
  
• 5-year warranty and lifetime tech support

NOTE: Z-Wave gateway controller required - sold separately.*Your hub needs to support advanced settings for this feature to be available.

INSTALLATION

Please follow the manual guidelines and diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.

Check for neutral wires BEFORE purchasing. One white wire from a 14-3 romex is NOT a neutral. Ask us if you're not sure about the wiring, we'll help quickly!

How to include the 700 Series On / Off switch to your smart home hub?

1. Make sure the switch is installed within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the upper paddle of the switch 3 times quickly to finalize the inclusion process
4. A new on/off switch will appear on your controller's device list

 NOTE:  Follow an appropriate diagram from the manual to wire the switch in a 3-way or 4-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.

SHOP COLOR PADDLES

WORKS WITH

• 2GIG (no advanced settings available)
• Abode
• ADT Pulse (no advanced settings available)
• Almond (Securify)
• Fibaro Home Center 2
• Fibaro Home Center Lite
• Home Assistant (Z-Wave JS)
• HomeSeer
• Hubitat
• InControl
• Indigo
• ISY994Zw
• openHAB
• Open Z-Wave
• Piper (no advanced settings - on/off control only)
• Ring (no advanced settings or scene control)
• SmartThings Hub (custom device handler needed to access advanced settings available here)
• Staples Connect DLink (no advanced settings - on/off control only)
• VeraEdge Z-Wave Gateway Controller (no scene control)
• VeraPlus Z-Wave Plus Advanced Home Controller (no scene control)
• VeraSecure Z-Wave Plus Advanced Smart Home Security Controller (no scene control)
• Wink and Wink 2 (no advanced settings)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

• Z-Wave Frequency: 908.42 MHz (US)
• Power: 120 VAC, 60 Hz
• Maximum Load: 8 A, 150 W LED/CFL, 600 W incandescent
• Z-Wave Range: Up to 200 feet line of sight
• Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
• Operating Temperature: 32-104° F (0-40° C)
• Installation: Indoor use only

RESOURCES

Download the Manual for Zooz 700 Series S2 On / Off Wall Switch ZEN76 (PDF)