Zooz 700 Series Z-Wave Plus Smart Plug ZEN04

$26.95 $32.95

| /

Product Condition (See full condition details below)
More selection specific details in description below.

Small, fast, secure

PRODUCT HIGHLIGHTS

  • On/off Z-Wave control for floor lamps & small appliances (do NOT use with transformers, humidifiers, fans, and other motor loads)
  • 700 series Z-Wave chip: more range for reliable wireless communication
  • Power monitoring in live mode or over time*
  • SmartStart and S2 authenticated security 
  • Great for use with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances, go with the Power Switch instead; NOTE: FEIT bulbs are not recommended)
  • Status restore: the plug remembers and goes back to original state after power failure
  • Built-in signal repeater: keep your network fast and healthy
  • 5-year warranty (when registered) and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and configuration for you to take advantage of this feature.

    How It Works

    Give your current small appliances the power of Z-Wave. While connected to your Z-Wave controller, enjoy wireless on/off control of your most crucial everyday devices such as lamps, TV/audio equipment, computers, and clocks (no heavy-duty appliances like washers or dryers).

    Know exactly how much power they're consuming at any given moment and over time. Create custom scenes designed around your schedule: it will work just as good by your bedside as for your holiday lights (indoors only).

    If your Z-Wave hub allows, the Smart Plug even lets you customize advanced configurations and parameter adjustments based on your preferences. This is a simple, low-cost electrical solution that will give you a smarter, more efficient home. 

    INSTALLATION

    Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load.

      How to include the Smart Plug to your smart home network?
      1. Insert the Smart Plug into a standard 120 V receptacle
      2. Put your Z-Wave controller in inclusion/pairing mode
      3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
      4. A new on/off device will appear on your hub's device list

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • 2GIG (no advanced settings available)
      • ADT Pulse (no advanced settings available)
      • Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard list)
      • Ezlo Secure (select "Generic Z-Wave device" from the Device Wizard list)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer
      • Hubitat
      • Indigo
      • ISY994Zw
      • Jeedom
      • openHAB
      • Ring (no power consumption info or advanced settings - on/off control only)
      • SmartThings (register your product here to access the custom lua driver for advanced functionality)
      • Vera

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        SPECIFICATIONS

        • Z-Wave Frequency: 908.42 MHz (US)
        • Power: 120 VAC, 60 Hz
        • Maximum Loads: 960W incandescent, 150W LED bulbs, 15A resistive, 1/3 HP fan motors
        • Z-Wave Range: Up to 300 feet line of sight
        • Dimensions: 1.5" tall, 2.6" wide, 1.14" deep
        • Operating Temperature: 32-104° F (0-40° C)
        • Installation: Indoor use only

          RESOURCES

          Download the Manual for the Zooz 700 Series Z-Wave Plus Smart Plug ZEN04 (PDF)


          Next Previous

          Customer Reviews

          Based on 6 reviews Write a review