Zooz 800 Series Z-Wave Long Range Double Switch ZEN30 800LR (White) for Light & Fan Combo

$29.95 $39.95

| /

Do It All



  • Z-Wave Plus Dimmer (up to 75 W LEDs and 250 W incandescent) and On/Off Relay in one
  • The first Z-Wave double wall switch! Here are some ideas for how to use it in your smart home.
  • Direct replacement for fan / light combo switches or other double switches in your home
  • NEW 800 chip:  more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • DIMMER: double tap to full brightness, custom brightness level on, adjustable ramp rate and dimming speed, and more great features you've known Zooz for!*
  • RELAY: on/off control only, use it with ceiling fans or exhaust fans, built-in overload protection, dry contact relay for more creative applications, no load necessary so you can use it as a virtual switch or scene controller.
  • Scene Control (select hubs only): trigger up to 18 scenes or control up to 18 devices with multi-tap control.*
  • Smart bulb ready: use scene control or simple automations to easily program smart bulb control with this switch without cutting power to them
  • NO DIRECT 3-WAY: use in single pole set-ups only. Can be used in virtual 3-way's without any direct connections to the other switches in 3-way and 4-way installations. Contact us for details.
  • Adjustable LED indicator: choose from 4 colors and 3 brightness levels
  • Quick Installation: pigtail wires (wire nuts included), only 1.1" deep and no heatsink tabs for an easy fit
  • White (no other color available - currently no plans for other colors)
  • S2 security with SmartStart for safer wireless communication
  • OTA firmware updates for a future-proof device
  • Built-in signal repeater to boost your Z-Wave network
  • Restores status after power failure
  • Air-gap switch for added safety
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • 5-year warranty and lifetime tech support
  • Check out ZEN30 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.


    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire cap, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire caps, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description


    You asked, Zooz answered! One part light dimmer, one part 15A on/off relay, this Double Switch has endless use cases. Make it your go-to Z-Wave solution for existing stacked switches controlling a ceiling fan and lights on the fan. If you have two switches that control a fan and light separately (2 connections coming into the box, 1 for the motor and 1 for the light), use the Double Switch to combine them!

    You can also use this device to control two sets of lights with one switch (one dimmable, one on/off), saving space in your box for another application. Or skip on the load for either the dimmer or relay, and use the Double Switch as a remote control for other scenes and devices in your Z-Wave network.

    Besides fan control, the 15 A relay in the Double Switch is a dry contact that can be used in a variety of creative applications. Use it to add Z-Wave to an outlet receptacle or load from a different circuit.

    The Double Switch supports OTA firmware updates so you’ll be able to take advantage of Zooz’s frequent upgrades and feature additions. And once added to your Z-Wave hub, the Double Switch will immediately start boosting Z-Wave signals to strengthen your connections and extend the range of other devices. It supports the newest S2 authenticated security protocol for secure communication, and its Z-Wave Plus 700 series chip ensures stable connections with your hub.


    Please follow the manual carefully and refer to the supplied diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.

    Check for neutral connections BEFORE you buy. A white wire from a 14-3 romex is usually NOT a neutral. Ask us if you're not sure what to look for, we'll be happy to help!

    Zooz Z-Wave Plus S2 Double Switch ZEN30 Wiring Diagram

    How to include the Z-Wave Plus S2 Double Switch to your smart home hub?

    1. Make sure the switch is installed within range of your Z-Wave network
    2. Put your Z-Wave hub in inclusion/pairing mode
    3. Tap the upper paddle of the dimmer 3 times quickly to finalize the inclusion process
    4. A new dimmer and on/off switch will appear on your controller's device list

     NOTE:  If you can't match your wiring with any of the diagrams included in the manual, let us know and we'll walk you through the wiring process.


    • Z-Box Hub (recommended for Zooz products)
    • Home Assistant (works best with device specific code, install here)
    • Homey (Zooz App for Homey)
    • Hubitat (2.1.8 release or higher)
    • ISY
    • openHAB (2.5.1 or higher)
    • SmartThings (custom lua driver recommended, download it here)
    • Wink and Wink 2 (no advanced settings, add as Generic Z-Wave Switch)

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


      • Z-Wave Frequency: 908.42 MHz (US)
      • Power: 120 VAC, 60 Hz
      • Z-Wave Chip: 800 Series (800LR only)
      • Maximum Load for Dimmer: 75 W LED, 250 W incandescent (don't use with tube lights, chandeliers, switched receptacles, or fans)
      • Maximum Load for Relay: 15 A
      • Z-Wave Range: Up to 100 feet line of sight
      • Operating Temperature: 32-104° F (0-40° C)
      • Dimensions: 1.7" x 4.1" x 1.1"
      • Installation: Indoor use only


        Download the Manual for Zooz Z-Wave Plus S2 Double Switch ZEN30 800LR (PDF)

        ZEN30 Frequently Asked Questions

        Advanced Settings

        Support Portal

        Next Previous

        Customer Reviews

        Based on 103 reviews
        Randall Hewitt
        Work Great for Light/Ceiling Fan Combo

        These work great and are z-wave addressable independently as two switches. I like them, and am ordering more.

        John Goodnough
        Good and Bad

        I purchased a Z-Box, a Zen16 Multirelay, and two Zen30 double switches at the same time. The products seem well made. Documentation appeared to be good but has proven to be somewhat inaccurate (needs updating) and a bit incomplete. Most relevant is the support available from Zooz is not good. They are pleasant, responsive and reply quickly, but simply ask lots of questions without providing answers or guidance. I’ve literally spent hours troubleshooting an issue and have received not a single word from support on what’s going on. The overall integration of Zooz products is slick and desirable, but be prepared to figure out any problems on your own.

        Robert Lefler
        Great Service & Great Product

        I've bought several of these and they all work great. I highly recommend all of zoOZ products!
        They pair easily and respond good with Hubitat.

        Excellent product

        Great product, works fine with both Home Assistant and Hubitat.

        Joshua Langschied
        Zooz is the best!

        Zooz light switches are simply fantastic. Their ability to be customized with multiple different scenes/automations is just amazing. I first stumbled upon Zooz when looking for a Zwave switch, as I wanted more local control, but also one less device bogging up my Wifi. This would by my 4th Zooz Zwave Device and I love them all. I cant speak for their longevity, but so far I'm very happy. I think their is really only one other brand that offers ability to disable the Relay on the switch so that you could use these switches with Smart Bulbs, allowing you the best of both worlds, with Awesome RGB smart bulbs, but the classic wall control of a light switch, as long as you properly set it all up.

        If I had to complain at all, it might be the feel of the material or paddles themselves, definitely feel sort of "light weight", but they still look fantastic, and the tactile feedback of operating the switch is good enough, especially considering the price of these items, since Zwave is normally more expensive for an equivalent wifi switch. As long as the Zooz devices I currently have continue to be strong, I'll be purchasing several more.