Zooz 800 Series Z-Wave Long Range Q Sensor ZSE11 800LR | Motion, Temp, Humidity, Light

$37.95

– Sold Out

| /

Z-Wave Frequency
Product Condition (See full condition details below)

Quick MultiSensor

The Zooz ZSE40 is a Z-Wave Plus certified device

PRODUCT HIGHLIGHTS

  • Security monitoring: get motion alerts sent to your Z-Wave hub whenever activity is detected
  • Climate control: use this sensor to trigger your smart thermostat or humidifier based on regular precise temperature and humidity readings
  • Smart lighting: program your Z-Wave switches and smart bulbs to come on when the Q sensor reports motion and lux levels below your preferred set point
  • Power it with 2 CR 123A batteries (included) or a micro USB cable (sold separately, scroll down to shop)
  • Works as Z-Wave signal extender when powered via USB (do NOT pair the sensor on USB cable and then switch to batteries)
  • NEW 800 series Z-Wave chip: more range for reliable wireless communication
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • SmartStart and S2 authenticated security
  • Advanced settings to customize your sensor
  •  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH WINK OR ALARM PANELS) 
  • Modern minimal design with a multi-directional mini mounting bracket
  • 5-year warranty (when registered) and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

    SPECIFICATIONS

      • Z-Wave Region: US / CA / MX
      • Z-Wave Chip: 800 series
      • Power: 2 CR123A battery (included) / micro USB (cable or power supply not included, scroll down for options). Use a small  5V max 1A power supply  for USB power. Do not use Apple chargers with any Zooz device, as they can provide up to 20V or more to non-Apple products, which would damage the device.
      • Z-Wave Range: Up to 150 feet line of sight (or up to 1300 feet with Long Range enabled)
      • Motion Detection: Up to 20 feet
      • Humidity Detection Range: 0 – 100 %
      • Light Sensor Detection Range: 0 – 65535 lux
      • Operating Temperature: 32° – 104° F
      • Dimensions: 2.3” x 2.3” x 2.2”
      • Installation: Indoor Use Only

    RESOURCES 

    Zooz Z-Wave Long Range Q Sensor ZSE11 800LR Manual (PDF)

    Advanced Settings

    Support Portal

    WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Hubitat (with custom driver)
      • Homey (Zooz App for Homey)
      • Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security))
      • openHAB
      • SmartThings Hub (with Edge driver)

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    GET POWER SUPPLY

     

    Customer Reviews

    Based on 97 reviews
    84%
    (81)
    12%
    (12)
    2%
    (2)
    0%
    (0)
    2%
    (2)
    B
    Brayden P.
    High quality and very reliable

    I was shocked at how amazing my motion sensor and contact sensor worked I have no complaints 10/10

    N
    Nathan T.
    Sensor works great

    Was easy to pair with Home Assistant through our ZWave setup, and sends data to home assistant quickly.

    S
    Steve M.
    Bathroom Automation

    I installed the Q Sensor ZSE11 in my bathrooms to trigger turning on the Exhaust fan (ZEN75) when humidity is high and dim lighting at night (ZEN72). The ZSE11 performance is responsive, consistent and reliable for this use case. Its easy to install and to add to Home Assistant and has a long battery life (have yet to need to replace the battery in over a year).

    J
    John M.
    An improvement

    Over the old version. Easier setup and more reliable

    A
    Austin
    Multisensor

    Added to a bathroom to pair with a zwave light switch. Easy to set up and works great!