Zooz 800 Series Z-Wave Long Range Q Sensor ZSE11 800LR | Motion, Temp, Humidity, Light

$35.95 $39.95

| /

Quick MultiSensor

The Zooz ZSE40 is a Z-Wave Plus certified device

PRODUCT HIGHLIGHTS

  • Security monitoring: get motion alerts sent to your Z-Wave hub whenever activity is detected
  • Climate control: use this sensor to trigger your smart thermostat or humidifier based on regular precise temperature and humidity readings
  • Smart lighting: program your Z-Wave switches and smart bulbs to come on when the Q sensor reports motion and lux levels below your preferred set point
  • Power it with 2 CR 123A batteries (included) or a micro USB cable (sold separately, scroll down to shop)
  • Works as Z-Wave signal extender when powered via USB (do NOT pair the sensor on USB cable and then switch to batteries)
  • NEW 800 series Z-Wave chip: more range for reliable wireless communication
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • SmartStart and S2 authenticated security
  • Advanced settings to customize your sensor
  •  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH WINK OR ALARM PANELS) 
  • Modern minimal design with a multi-directional mini mounting bracket
  • 5-year warranty (when registered) and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    GET ACCESSORIES

    10ft USB cable for the Zooz S2 Motion Sensor ZSE18   USB Power Adapter for the Zooz S2 Motion Sensor ZSE18   3ft USB Cable for the Zooz S2 Motion Sensor ZSE18


    WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer
      • Homey (Zooz App for Homey)
      • Hubitat
      • Indigo
      • openHAB
      • SmartThings Hub (register your product here to access the custom lua driver for advanced functionality)

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

      • Z-Wave Region: US / CA / MX
      • Z-Wave Chip: 800 series
      • Power: 2 CR123A battery (included) / micro USB (cabled not included)
      • Z-Wave Range: Up to 150 feet line of sight (or up to 1300 feet with Long Range enabled)
      • Motion Detection: Up to 20 feet
      • Humidity Detection Range: 0 – 100 %
      • Light Sensor Detection Range: 0 – 65535 lux
      • Operating Temperature: 32° – 104° F
      • Dimensions: 2.3” x 2.3” x 2.2”
      • Installation: Indoor Use Only

    RESOURCES 

    Zooz Z-Wave Long Range Q Sensor ZSE11 800LR Manual (PDF)

    Advanced Settings

    Support Portal


    Next Previous

    Customer Reviews

    Based on 17 reviews
    47%
    (8)
    35%
    (6)
    6%
    (1)
    0%
    (0)
    12%
    (2)
    A
    Andrew
    Do not buy

    I have 4 of them around the house. Each one is a trouble of different kind:
    1) it will hog through the batteries - changing it every 2 months in some of them
    2) other one emits fake movement events when it is sitting in empty room
    3) other just won't trigger on movement until you reset them
    4) humidity readings are way off and different on every unit.

    Hi Andrew,
    We're sorry the sensors haven't worked as expected for you. It sounds like they have not been fully configured or there are network issues preventing the sensors to perform correctly. We recommend checking the power source, your hub's network settings, and configuration on the sensor itself. Batteries should last around 10-12 months with normal use as long as there are no communication issues.

    J
    Jeff
    Ticked All The Boxes For Me

    I've gone a bit against the norm with this motion sensor. I use it in an outdoor temporary tent garage to trigger overhead lighting. This was the only sensor I could find that used external USB power with the sensors I wanted, temp/humidity/lux/motion. Although explicitly rated "indoor", it seems to work fine in protected outdoor situations. Despite the temperature being "rated" to barely freezing, it does track much colder temps. (Pushed -15F so far, will see if it fails down to -40F this winter...suspect it'll be just fine.) It was a little tricky for me to mount this to a pole, but was able to get it mounted without any major compromise. It's quite sensitive, I had to turn down the sensitivity to halfway to reduce false triggers. I own pretty much every model of Zooz motion sensors, I'm glad they make slightly difference units with slightly different needs as I've found all of them useful for my various applications.

    R
    Ryan B
    Great Sensor!

    I actually needed all of the features of this sensor but didn't know there was an all-in-one product. I was about to buy 4 different sensors before I came across this one. It gets the job done at about 1/4 of the price I would have spent. It works amazing as well. Someone said that the motion was slow to respond, but I did not experience that, in fact, it feels almost instant. Now I have to buy 5 more for all of my rooms. I don't need them but they are just so cool!

    T
    Travis
    Great for Bathroom Automation

    I have 2 setup in 2 bathrooms to automate lights and exhaust fans. They are very reliable and easy to setup with Home Assistant.

    Since I run these off mains power, I have no experience with the battery or performance issues others have mentioned.

    c
    crzynik
    Great Multisensor that can be set to update very frequently when plugged in

    Been happy with the few of these that I bought, have them updating once a minute while plugged in and they are working very well.