Qubino Z-Wave Plus Flush Shutter DC Module ZMNHOD3 for 12-24V Motors

$45.95 $54.95

| /

Product Condition (See full condition details below)

Smooth Shade Control 

PRODUCT HIGHLIGHTS

    •  GARAGE SALE DEAL:  final sale, not eligible for return, exchange, or refund. 6-month limited warranty. This is the final part of our inventory, we will NOT be restocking this version in the future.
    • Adds Z-Wave control to 12-24V motor shades, blinds, and shutters
    • Automatic calibration and precise positioning
    • Works with motors controlled by mechanical and electronic wall switches
    • Provides energy use reports for your motorized shades*
    • Built-in signal repeater and the latest Z-Wave Plus chip for stronger network
    • Super small form factor makes the installation quick and convenient
    • Adds to your Z-Wave hub in seconds with the new auto-inclusion feature
    • Designed and manufactured in Europe
    • 2-year warranty

NOTE: Z-Wave gateway controller required - sold separately. *Your controller needs to support advanced configuration and parameter input to display these features.

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

  • NEW: brand new product, as delivered by the factory
  • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included
  • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, etc)
  • USED: used condition, may show signs of wear, may not include accessories (like product manual, etc) or parts of the packaging; may show signs of wear like scratches.

 FINAL SALE:  not eligible for return, replacement, or refund. Limited 6-month warranty.

GET ACCESSORIES

Buy the digital temperature probe for Qubino relays

HOW IT WORKS

Be the master of the sun - while you’re in your smart home at least. The Qubino Flush Shutter DC is the answer to automating your window blinds, shades, rollers, awnings, or curtains with 12-24V DC motors. When connected to your Z-Wave gateway controller, control your blinds wirelessly or with a wall switch.

Check the status of Z-Wave connected blinds on your smart phone or computer; easily open and close them at the push of a button. Monitor the power consumption of your blinds to save on energy bills. Create daily schedules to open and close your blinds automatically based on the position of the sun. Instantly close them as soon as the sun sets to easily maintain your privacy.

Equipped with the latest Z-Wave Plus technology and a signal repeater, the Qubino Flush Shutter DC is a small way to greatly improve your entire smart home.

INSTALLATION

Before proceeding with the in-wall installation, please note:
    • If you are unfamiliar with the process of installing electrical wiring into a flush mounting box, please contact a licensed and qualified electrician.
    • Be sure the power supply is completely disconnected and the fuse disabled.
    • Be sure the recommended loads are never exceeded. Failure to do so may result in injury and/or damage to your device.

If including the Flush Shutter DC to your Z-Wave network automatically, first put your Z-Wave gateway controller into inclusion/pairing mode. Then connect the module to the power supply (see your operational manual for details). Within a few seconds you will see the new device on your controller’s device list. 

Qubino Z-Wave Plus Flush Shutter DC Module ZMNHOD3 for 12-24V Motors Wiring Diagram

If including manually, first connect the device to the power supply. Then, put your controller into inclusion/pairing mode. Press the S (service) button for at least 2 seconds. Once successfully included, the Flush Shutter module will appear on your controller’s device list. It will most likely show up as shutter control or motor controller.

WORKS WITH

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

    • Z-Wave Frequency: 908.42 MHz (US)
    • Power Supply: 24VDC
    • Maximum Load: 2A
    • Power Consumption: 0.3W
    • Operating Temperature: 14 - 104 F
    • Dimensions: 1.6" x 1.4" x 0.6"
    • Weight: 1 oz

RESOURCES

Download the Manual for Qubino Z-Wave Plus Flush Shutter DC Module ZMNHOD3 (PDF)


Next Previous

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
J
Jason
Struggle with reliablity

To be fair, I am/was using this device to control a motor... But not the intended 'design' purpose of windows/shades. However, everything should be fine. My issue was that it would randomly fail to run the motor long enough for the "open" mode. I have played with the learning functions and different current threshold settings. It would fix this issue for a month or so then fail again. I even set the minimum run time to use the limit switch function with no luck.
Used with a Hubitat.

K
Kevin
Great for automating windows!

I got the Qubino Z-Wave Plus Flush Shutter DC Module to operate a linear actuator that I use to open and close my double hung window. This gadget is super compact and can handle a 2 amp load. The module paired easily with Hubitat and shows as a Qubino Shutter Module. The module allows for voice control, trigger control and it even has inputs for a switch so you can control it manually. It is compact enough to fit in a single gang box with a standard wall switch.

K
Kevin V.
Perfect Z-Wave Controller for DIY Exterior Blinds Project

Purchased this Qubino Shutter Module for the task of being able to control our exterior blinds through automation from our Hubitat Elevation -- received the unit super-quickly from thesmartesthouse.com and began testing right away with a 12V roller motor and automation rules from HE -- works great!

I was initially looking at the Aeotec Nano Shutter S2 (approximately the same price as the Qubino, however with an increased wireless range) but integration in Hubitat is not yet supported as widely as the Qubino -- felt the safer route for my purposes was going with the Qubino. Happy I did.

The Qubino shutter module is Z-Wave Plus, acts as a Z-Wave repeater, and works flawlessly -- absolutely no issues pairing and configuring. Great little motor controller!