Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR

$32.95 $37.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

SMARTER LIGHTING

PRODUCT HIGHLIGHTS

  • Dimming Z-Wave control for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs)
  • Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A
  • 700 series Z-Wave chip: more range, reliable coverage
  • Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags
  • Advanced settings to customize minimum or maximum brightness level and more*
  • Built-in signal repeater: keep your mesh network stable and your system fast
  • SmartStart and S2 authenticated security for a truly protected smart home
  • Installs behind the existing wall switch or at the fixture (check your wiring first and always follow the diagrams in the manual)
  • Pigtail wires included for quicker set-up
  • 5-year extended warranty when registered and tech support forever

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub/controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.

    Z-WAVE FREQUENCY

    This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency/region as your end devices when buying Z-Wave controllers to include products in your system without issues. If you're not sure which frequency your devices use, please contact the manufacturers first. Here is what each option stands for:

    • US/CA/MX: 908.42 MHz (used primarily in the US, Canada, and Mexico, the default option for all products)
    • EU/UK: 868.42 MHz (used primarily in Europe), Z-Wave Long Range is not supported for this frequency!
    • AU/NZ: 921.4 MHz (used primarily in Australia and New Zealand), Z-Wave Long Range is not supported for this frequency!

    SPECIFICATIONS

    • Z-Wave Region: US, CA, MX / EU, UK - choose your region before adding this product to the cart
    • Power: 120-240 VAC, 50/60 Hz
    • Maximum Loads: 4 A, 480W at 120V, 960 W at 240V
    • Maximum A rating: 200 mA
    • Z-Wave Range: Up to 300 feet line of sight or up to a mile with Long Range enabled)
    • Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

      RESOURCES

      Download the Manual for the Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR (PDF)

      Advanced Settings

      Support Portal

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • Ezlo Plus (no access to advanced parameters on Android app)
      • Ezlo Secure (no access to advanced parameters on Android app)
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Hubitat (custom driver needed)
      • SmartThings (Edge driver needed)
      • Vera

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        INSTALLATION

        Before installing, make sure your fixture uses a 0-10 V dimming driver which doesn't exceed 4 Amps. Check your wiring first to confirm that you have all the following wires present in your electrical box: both 0-10 V driver connections, power, neutral, and load connection to power the LED driver, as well as a connection to a wall switch.

        If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

        Zooz 0-10 V Dimmer ZEN54 Wiring Diagram

        Here are some helpful wiring tips:

          • Make sure the gang box you are about to install the switch has power with neutral wire available - you will not be able to get the ZEN54 Dimmer to work without a neutral wire.
          • Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

        How to include the 0-10 V Dimmer to your smart home network?
        1. Put your Z-Wave controller in inclusion/pairing mode (or scan the QR code on the ZEN54 if your hub supports SmartStart)
        2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process
        3. A new dimmer switch should appear on your hub's device list

        Customer Reviews

        Based on 7 reviews
        100%
        (7)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        N
        Nathan
        Excellent for 0-10v, Versatile and thoughtfully designed

        This is an excellent 0-10V dimmer, and I’ve found it to be much better than others I’ve tried for smart home setups. Unlike many alternatives, the Zooz dimmer includes a built-in relay, allowing you to cut power to the light in addition to dimming it. This feature is essential because some 0-10V lights don’t fully turn off at their lowest dimming setting, requiring a separate relay or smart switch to completely cut power. With this dimmer, you can fully dim the light and power it off as needed, all in one device, with adjustable options to suit your setup.

        Another feature I appreciate is that it doesn’t require 110V AC to control the dimming. The switch wire uses the DC ground, allowing control via low-voltage DC wiring, which eliminates the need to meet strict codes for high AC voltage. This makes it especially versatile and simplifies the installation of the manual control switch. You just need a single button, wired between the switch wire and the gnd wire, to dim and turn the attached light on and off manually.

        If I could suggest one improvement, it would be the inclusion of two wires for the switch, allowing compatibility with dimmers that have separate buttons for dim up and dim down. However, thanks to the robust Z-Wave functionality, this is less of an issue than I initially expected. The single-button control works well, and Z-Wave logic makes it easy to dim and control lights remotely. For instance, you can use multiple of these 0-10v switches controlled via zwave by a Zooz smart dimmer, to manage and sync lighting seamlessly.

        Overall, I haven’t found any Z-Wave, zigbee, or Wi-Fi 0-10V dimmer I prefer over this one, and wish I had tried this one first. The flexibility it offers for 0-10V lighting systems, combined with its low-voltage dimmer switch wiring, thoughtful design, and robust Z-Wave options, makes it an excellent choice for both residential and commercial applications. Highly recommended!

        R
        Ralf
        Works well

        Using two of these to control outdoor wall packs. They are able to override the built in brightness selectors (unlike a competing wifi product from a European competitor). These cut the power after dimming to off.

        So far I’m satisfied.

        Z
        Zion Barkley
        Product worked well, App is clean and refined.

        Arrived on time and product worked well, will be purchasing again.

        V
        Vladimir Korobov
        Great product

        Im using that dimmer with LED high wattage driver (300W) for landscape LED lights (dimmable). Works really great

        R
        Ricardo Vasquez
        Easy to set up - Stable

        Easy to install, good instructions, reliable