Zooz 800 Series Z-Wave Long Range XS Temperature | Humidity Sensor ZSE44 800LR

$19.95 $35.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

For Smarter Air

This is a Z-Wave Long Range device

PRODUCT HIGHLIGHTS

  • Temperature sensor: track air temperature in the room of your choice to adjust your smart thermostat with more accuracy than ever.
  • Humidity sensor: get notified if the humidity drops or rises above the set level and trigger your smart (de)humidifier to keep the climate of your sunroom or living room steady.
  • Small and discreet: The simple and slim design helps blend the sensor with your interior for the invisible type of monitoring you'd expect from a modern sensor.
  • Outside installation: Mount it on your covered porch or under the eve, just make sure to keep it away from direct rain and sun. The mounting bracket is now included with the device and recommended for outdoor installation.
  • New 800 series Z-Wave chip: get more range, longer battery life, and quicker reports with the latest technology
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • Powered by a single CR2450 battery (Energizer, Panasonic, or Maxell recommended. Do NOT use Duracell batteries due to the extra bitter coating that prevents contact.)
  • S2 and SmartStart for extra security
  •  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH ALARM PANELS) 
  • 5-year extended warranty once registered and lifetime tech support
  • Check out ZSE44 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

    PRODUCT CONDITION

    We may have this product available in an open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    Z-WAVE FREQUENCY

    This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for:

    • US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products)
    • EU/UK: 868.42 MHz (used primarily in Europe)
    • AU/NZ: 921.4 MHz (used primarily in Australia and New Zealand) 

    How It Works

    This sensor is perfect for spot monitoring in spaces where your smart thermostat doesn't reach. Install the device in your bedroom to prepare just the right temperature for the night. Mount it in the basement or on your sun porch to trigger climate control device and keep the air constant where humidity and temperature is most likely to change quickly.

    Just stick it to the flat surface of your choice with the supplied adhesive tape for 1-minute installation. We recommend using the dedicated mounting bracket if you'd like to install the sensor outdoors. Always keep the device out of direct sunlight and rain or snow.


    WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • eedomus
      • Ezlo
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Homey (Zooz App for Homey)
      • Hubitat (2.3.0 or higher)
      • Jeedom
      • OpenHAB
      • Ring Alarm (temperature reports only)
      • SmartThings Hub (register your product here to access the custom lua driver for advanced functionality)

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

      • Z-Wave Region: US, CA, MX / EU, UK - choose your region before adding this product to cart
      • Z-Wave Chip: 800 series
      • Power: 1 CR2450 battery (included)
      • Mounting Bracket (included)
      • Wireless Range: Up to 300 feet line of sight with traditional Z-Wave mesh (up to 1300 feet with Z-Wave Long Range)
      • Operating Temperature: 40° – 90° F
      • Dimensions: 2.2” x 1.3” x 0.2”
      • Installation: Indoor or outdoor under eve in the bracket

    RESOURCES 

    Zooz Z-Wave Plus 800 Series Z-Wave Long Range XS Temperature | Humidity Sensor ZSE44 800LR User Manual (PDF)

    ZSE44 Frequently Asked Questions

    Advanced Settings

    Support Portal

    Customer Reviews

    Based on 44 reviews
    84%
    (37)
    9%
    (4)
    5%
    (2)
    2%
    (1)
    0%
    (0)
    M
    Matthew M
    Amazing Product! Very Happy With Range!

    Recently picked up a couple sensors and the Zooz 800 LR USB. Super impressed with how well everything works and the range! I need to definitely order a couple more! Thanks for the fast shipping and excellent support staff!

    S
    Stephen
    Works with openHAB. Took two inclusion attempts.

    Now that it's included into my Z-wave network, this sensor is working well and reporting accurately in OpenHAB. I will however say that it took two attempts to include -- bring the device to the hub for inclusion, because it won't fully be discovered if not or might take too long for your liking if you keep it in the remote location while including.
    Included wall mount works well. Seems to be durable and nondescript at the same time.

    E
    Eric Hupp

    Zooz 800 Series Z-Wave Long Range XS Temperature | Humidity Sensor ZSE44 800LR

    W
    William Reilly
    Useful little sensor

    I have five of these sensors installed in my home already and I find them very useful. I have two programed through Hubitat to cycle fans on at a set temperature. I may add a few more in the future

    K
    Kevin K
    Great for making exhaust vents smart

    I have these set up in my bathroom near the showers. The humidity sensor is very quick to update when the shower is running. With the advanced configuration options, you can set a separate low and high humidity alert level, and configure these to send basic on or off (or both!) alerts as the humidity raises or lowers past these thresholds. Paired with a Zooz dry socket relay or smart switch, I can directly start my bathroom exhaust vent when the humidity gets too high, and turn it off when the humidity drops back down to a lower level. Great for kids who just won't remember to turn the fan on! There are other configurable thresholds for the temperature if you have a use for them.