Zooz 800 Series Z-Wave Long Range Dimmer ZEN72 800LR

  EXPECTED RESTOCKING DATE: 12/20/2025 

NEW 800 SERIES!

PRODUCT HIGHLIGHTS

• Full brightness control of your lights, from the physical dimmer and via Z-Wave when added to your smart home hub (sold separately)
• NEW 800 chip:  more range, faster signal, SmartStart inclusion + S2 security
• Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
• What's the difference between the ZEN72 and the ZEN77 model? Read here!
• Works with any dimmable LED bulb that accepts triac (forward-phase) dimmers up to 150 W total and with any incandescent bulbs up to 500 W. NOT COMPATIBLE WITH LUMINUS, LITHONIA, OR FEIT BULBS.
• Direct 3-Way Solution: connects to an existing light switch for 2-point control, no add-on switch necessary! Wires just like the ZEN22 model. Neutral wire required, on/off control only from the secondary switch, use in 4-way installations only if you have direct connection to load and line in one box.
• Replaceable paddles  (almond and black paddle kits will be available soon for this hardware version, the paddles sold currently at our store are NOT compatible with this ZEN72 hardware version) 
• Small profile (just 1.1" deep) to fit easily in a crowded or shallow box
• Adjustable LED indicator: choose the color and brightness that works for you!
• Scene control: multi-tap triggers available on select hubs*
• Night Light Mode: press and hold the lower paddle when dimmer is off to turn the light on to low brightness
• Double tap to full brightness: now fully adjustable double tap and single tap behavior*
  
• Fully adjustable ramp rate*
• Don't use with fan motors, halogen bulbs, transformers, receptacles, or tube lights!
  
• Stronger signal repeater for a more reliable Z-Wave network 
  
• NEW: YOU choose the color and brightness level of the LED indicator*
• Fits a standard-size face plate for single and multi gang installations (face plate not included)
• Lifetime tech support and 5-year extended warranty once registered
  
• Check out Zooz Light Switches & Dimmers Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

  Not sure which dimmer model to choose?   Read a guide to Zooz switches here!

Here is a simplified overview of the recommended dimmer models for the most common scenarios (read the full guide above for more details):

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

• NEW: brand new product, as delivered by the factory
• OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
• REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire jumper, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
• USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire jumper, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

SPECIFICATIONS

• Z-Wave Region: US/MX/CA
• Hardware Version: 3.0
• Power: 120 VAC, 60 Hz
• Maximum Loads: 500W Incandescent, 150W LED
• Range: Up to 200 feet line of sight, up to 1 mile with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
• Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
• Operating Temperature: 32-104° F (0-40° C)
  
• Installation and Use: Indoor only

RESOURCES

Download the Manual for the Zooz 800 Series Z-Wave Log Range Dimmer ZEN72 800LR (PDF)

More wiring diagrams for 3-way and 4-way set-ups

Zooz Light Switches & Dimmers Frequently Asked Questions

Advanced Settings

Support Portal

WORKS WITH

• Z-Box Hub (recommended for Zooz products)
• 2GIG (no advanced settings or scene control)
• ADT Pulse (no advanced settings or scene control)
• Fibaro Home Center 2
  
• Fibaro Home Center Lite
• Home Assistant (Z-Wave JS)
• HomeSeer (with Z-Wave Plus plug-in)
  
• Homey (Zooz App for Homey)
• Hubitat
• InControl
• Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security)
• ISY994Zw
• Open Z-Wave
• Ring (no advanced settings or scene control)
  
• SmartThings (click here to access the custom lua driver for advanced functionality)
• Staples Connect DLink (no advanced settings - on/off control only)
• Wink and Wink 2 (no advanced settings)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. NOT SUPPORTED BY VIVINT.

CUSTOM ENGRAVING

You can now order a custom engraving for you smart switch paddles from our partners at Domotinc! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.

INSTALLATION

If you are not comfortable identifying the wiring and performing the installation, please consult a licensed electrician.

Here are some helpful installation tips:

• Make sure the gang box you are about to install the switch at features a neutral wire - you will not be able to connect the ZEN72 switch properly without a neutral wire. Neutral is usually in a bundle of white wires NOT connected to your original mechanical switch.
• Unlike your regular electrical switches, Z-Wave switches require particular wires to be connected exactly as indicated - line and load wires cannot be swapped as it often happens to the most experienced electricians.
• Z-Wave dimmers will work best with incandescent and high-quality DIMMABLE LED bulbs with at least 15 Watts on load.

How to include the 800 Series Dimmer switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion mode
3. Tap the UPPER paddle of the switch 3 times very quickly to finalize the inclusion process
4. A new dimmer (or multilevel switch) device will appear on your controller's device list

 NOTE:  Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches. This switch may wire differently in 3-way or 4-way installation than your other Zooz switch.