Zooz 800 Series Z-Wave Long Range Double Switch ZEN30 800LR (White) for Light & Fan Combo

$34.95 $39.95

| /

Do It All



  • Z-Wave Plus Dimmer (up to 75 W LEDs and 250 W incandescent) and On/Off Relay in one
  • The first Z-Wave double wall switch! Here are some ideas for how to use it in your smart home.
  • Direct replacement for fan / light combo switches or other double switches in your home
  • NEW 800 chip:  more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • DIMMER: double tap to full brightness, custom brightness level on, adjustable ramp rate and dimming speed, and more great features you've known Zooz for!*
  • RELAY: on/off control only, use it with ceiling fans or exhaust fans, built-in overload protection, dry contact relay for more creative applications, no load necessary so you can use it as a virtual switch or scene controller.
  • Scene Control (select hubs only): trigger up to 18 scenes or control up to 18 devices with multi-tap control.*
  • Smart bulb ready: use scene control or simple automations to easily program smart bulb control with this switch without cutting power to them
  • NO DIRECT 3-WAY: use in single pole set-ups only. Can be used in virtual 3-way's without any direct connections to the other switches in 3-way and 4-way installations. Contact us for details.
  • Adjustable LED indicator: choose from 4 colors and 3 brightness levels
  • Quick Installation: pigtail wires (wire nuts included), only 1.1" deep and no heatsink tabs for an easy fit
  • White (no other color available - currently no plans for other colors)
  • S2 security with SmartStart for safer wireless communication
  • OTA firmware updates for a future-proof device
  • Built-in signal repeater to boost your Z-Wave network
  • Restores status after power failure
  • Air-gap switch for added safety
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • 5-year warranty and lifetime tech support
  • Check out ZEN30 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.


    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire cap, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire caps, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description


    You asked, Zooz answered! One part light dimmer, one part 15A on/off relay, this Double Switch has endless use cases. Make it your go-to Z-Wave solution for existing stacked switches controlling a ceiling fan and lights on the fan. If you have two switches that control a fan and light separately (2 connections coming into the box, 1 for the motor and 1 for the light), use the Double Switch to combine them!

    You can also use this device to control two sets of lights with one switch (one dimmable, one on/off), saving space in your box for another application. Or skip on the load for either the dimmer or relay, and use the Double Switch as a remote control for other scenes and devices in your Z-Wave network.

    Besides fan control, the 15 A relay in the Double Switch is a dry contact that can be used in a variety of creative applications. Use it to add Z-Wave to an outlet receptacle or load from a different circuit.

    The Double Switch supports OTA firmware updates so you’ll be able to take advantage of Zooz’s frequent upgrades and feature additions. And once added to your Z-Wave hub, the Double Switch will immediately start boosting Z-Wave signals to strengthen your connections and extend the range of other devices. It supports the newest S2 authenticated security protocol for secure communication, and its Z-Wave Plus 700 series chip ensures stable connections with your hub.


    Please follow the manual carefully and refer to the supplied diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.

    Check for neutral connections BEFORE you buy. A white wire from a 14-3 romex is usually NOT a neutral. Ask us if you're not sure what to look for, we'll be happy to help!

    Zooz Z-Wave Plus S2 Double Switch ZEN30 Wiring Diagram

    How to include the Z-Wave Plus S2 Double Switch to your smart home hub?

    1. Make sure the switch is installed within range of your Z-Wave network
    2. Put your Z-Wave hub in inclusion/pairing mode
    3. Tap the upper paddle of the dimmer 3 times quickly to finalize the inclusion process
    4. A new dimmer and on/off switch will appear on your controller's device list

     NOTE:  If you can't match your wiring with any of the diagrams included in the manual, let us know and we'll walk you through the wiring process.


    • Z-Box Hub (recommended for Zooz products)
    • Home Assistant (works best with device specific code, install here)
    • Homey (Zooz App for Homey)
    • Hubitat (2.1.8 release or higher)
    • ISY
    • openHAB (2.5.1 or higher)
    • SmartThings (custom lua driver recommended, download it here)
    • Wink and Wink 2 (no advanced settings, add as Generic Z-Wave Switch)

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


      • Z-Wave Frequency: 908.42 MHz (US)
      • Power: 120 VAC, 60 Hz
      • Z-Wave Chip: 800 Series (800LR only)
      • Maximum Load for Dimmer: 75 W LED, 250 W incandescent (don't use with tube lights, chandeliers, switched receptacles, or fans)
      • Maximum Load for Relay: 15 A
      • Z-Wave Range: Up to 100 feet line of sight
      • Operating Temperature: 32-104° F (0-40° C)
      • Dimensions: 1.7" x 4.1" x 1.1"
      • Installation: Indoor use only


        Download the Manual for Zooz Z-Wave Plus S2 Double Switch ZEN30 800LR (PDF)

        ZEN30 Frequently Asked Questions

        Advanced Settings

        Support Portal

        Next Previous

        Customer Reviews

        Based on 97 reviews
        Dimmer Speed Adjustable in your Hub

        I have the dimmer connected to smart bulbs that flash when you turn off the dimmer. In home assistant, under the device configuration section, under the entities not shown, I was able to unhide Ramp rate for hub off and Ramp rate for physical off and change the dimmer from 1 second to 0 seconds and now my lights turn off quicker and don't flash.
        I ended up using this in my bathroom. I'm able to trigger the exhaust fan via the zooz humidity sensor although it only updates when it wants to. Pressing dimmer off and relay at the same time it's not recognized. So one at a time is needed. I have also noticed I've pressed the button from time to time while leaving the bathroom and it isn't recognized as a button press. This has been the case across zooz toggle switches, but once I automate on motion I will become less of a transient issue.

        Scott Kvale
        Very powerful when combining the ZEN30 with the ZEN52

        This is a great switch for bathrooms that originally have a single switch and a single wire running to a light & fan combo unit. I used this switch along with a ZEN52 relay.

        I ran un-switched power from the original switch to the ZEN52 which I installed in the light/fan housing so I could control the light and fan separately. I then replaced the wall switch with the ZEN30 which only has power but is not direct wired to anything else.

        I added event triggering from the ZEN30 to control the light and fan via ZEN52 relay independent of each other. I even added an auto shutoff event if the light is off and the fan has been left running for longer than 15 minutes.

        A note of caution. I recommend setting the minimum dimmer configuration value to 99 for the ZEN30 dimmer light since the ZEN52 is not a dimmer.

        Patrick Metzger
        No More Wasted Energy

        Having kids, its inevitable that every light will be left on either all together or individually. These new switches allowed me to create automations quickly and easily that turn off either thru movement or time of day. Such a great purchase and will be getting more to finish off my whole house.

        Great switch

        I have several of these switches installed, and they are great. Some are used as double switches, with the relay hooked up to a fan and the dimmer controlling a separate light. Others are used as virtual switches to control various routines. Connected easily to my Hubitat and work every time.

        Michael Galassi
        So good that they're boring

        It's hard to say too much about the switch other than it just works. Completely un-glamorous but there you have it. In a week or two I'll be switching my controller to the 800 series USB stick and if it's range is anywhere near as good as is advertised I'll get to merge my two z-wave networks into one, THAT will be exciting. The switch, it just does exactly what it says it will do. Yawn.