Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR Pack Shot

Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR for 0-10 V LED Fixtures

Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR Is Good for Commercial and Residential Lighting

Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR supports Z-Wave Long Range Technology

Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR

$32.95 $37.95

| /

SMARTER LIGHTING

PRODUCT HIGHLIGHTS

Beta Release This device may not be fully integrated with your hub at the time of purchase. You may need to update the firmware of the device after the purchase.
Dimming Z-Wave control for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs)
Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A
700 series Z-Wave chip: more range, reliable coverage
Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags
Advanced settings to customize minimum or maximum brightness level and more*
Built-in signal repeater: keep your mesh network stable and your system fast
SmartStart and S2 authenticated security for a truly protected smart home
Installs behind the existing wall switch or at the fixture (check your wiring first and always follow the diagrams in the manual)
Pigtail wires included for quicker set-up
5-year extended warranty when registered and tech support forever

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

INSTALLATION

Before installing, make sure your fixture uses a 0-10 V dimming driver which doesn't exceed 4 Amps. Check your wiring first to confirm that you have all the following wires present in your electrical box: both 0-10 V driver connections, power, neutral, and load connection to power the LED driver, as well as a connection to a wall switch.

If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

Zooz 0-10 V Dimmer ZEN54 Wiring Diagram

Here are some helpful wiring tips:

Make sure the gang box you are about to install the switch has power with neutral wire available - you will not be able to get the ZEN54 Dimmer to work without a neutral wire.
Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

How to include the 0-10 V Dimmer to your smart home network?
1. Put your Z-Wave controller in inclusion/pairing mode (or scan the QR code on the ZEN54 if your hub supports SmartStart)
2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process
3. A new dimmer switch should appear on your hub's device list

WORKS WITH

Z-Box Hub (recommended for Zooz products)
Ezlo Plus (no access to advanced parameters on Android app)
Ezlo Secure (no access to advanced parameters on Android app)
Home Assistant (Z-Wave JS)
HomeSeer
Hubitat (custom driver needed)
SmartThings (Edge driver needed)
Vera

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

Z-Wave Frequency: 908.42 MHz (US)
Power: 120-240 VAC, 50/60 Hz
Maximum Loads: 4 A, 480W at 120V, 960 W at 240V
Maximum A rating: 200 mA
Z-Wave Range: Up to 300 feet line of sight or up to a mile with Long Range enabled)
Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
Operating Temperature: 32-104° F (0-40° C)
Installation: Indoor use only