$28.95 $35.95
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for:
Before wiring the Double Relay in, check that the load does not exceed 500W for incandescent lights, 150W for LED's, 1/4 hp for fans and motors, or 5A for resistive load per relay. Examine all connections to verify that you have all the necessary wires available in the switch box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).
If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.
Here are some helpful wiring tips:
How to include the Double Relay to your smart home network?
1. Put your Z-Wave controller in inclusion/pairing mode
2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process (and scan the SmartStart security QR code or enter PIN if prompted)
3. Two new on/off switches and a master device should appear on your controller's device list
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Download the Manual for Zooz 700 Series Z-Wave Long Range Double Relay ZEN52 LR (PDF)
Easy to install. Easy to use. Home assistant friendly
Have only used for a week, but seems to do what it should do
I have many Zooz relays installed throughout my home and they've exceeded all my expectations. With the latest firmware, you can configure the relay to report switch state changes immediately - and it is extremely fast. I personally cannot tell any difference between the switch when it was 'dumb' and the switch after I installed the relay. I flip the switch and the light immediately turns on/off, and the state immediately updates in my Hub. The relay hardware is very small and I never had trouble installing them in a single or double gang box. I have a 4-gauge box with 4 switches and 2 double relays. Everything fit with room to spare. These relays are perfect if you want to turn your existing switches smart without changing their look, feal or responsiveness.
Fantastic little device to control two different lights. Replaced a few Shellys around the house with these and really appreciate the embedded wire leads, really makes installation a lot easier.
Everything was great