Zooz 800 Series Z-Wave Long Range Double Switch ZEN30 800LR (White) for Light & Fan Combo

$31.95 $39.95

| /

Product Condition (See full condition details below)

Do It All

  

PRODUCT HIGHLIGHTS

  • Z-Wave Plus Dimmer (up to 75 W LEDs and 250 W incandescent) and On/Off Relay in one
  • The first Z-Wave double wall switch! Here are some ideas for how to use it in your smart home.
  • Direct replacement for fan / light combo switches or other double switches in your home
  • NEW 800 chip:  more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • DIMMER: double tap to full brightness, custom brightness level on, adjustable ramp rate and dimming speed, and more great features you've known Zooz for!*
  • RELAY: on/off control only, use it with ceiling fans or exhaust fans, built-in overload protection, dry contact relay for more creative applications, no load necessary so you can use it as a virtual switch or scene controller.
  • Scene Control (select hubs only): trigger up to 18 scenes or control up to 18 devices with multi-tap control.*
  • Smart bulb ready: use scene control or simple automations to easily program smart bulb control with this switch without cutting power to them
  • NO DIRECT 3-WAY: use in single pole set-ups only. Can be used in virtual 3-way's without any direct connections to the other switches in 3-way and 4-way installations. Contact us for details.
  • Adjustable LED indicator: choose from 4 colors and 3 brightness levels
  • Quick Installation: pigtail wires (wire nuts included), only 1.1" deep and no heatsink tabs for an easy fit
  • White (no other color available - currently no plans for other colors)
  • S2 security with SmartStart for safer wireless communication
  • OTA firmware updates for a future-proof device
  • Built-in signal repeater to boost your Z-Wave network
  • Restores status after power failure
  • Air-gap switch for added safety
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • 5-year warranty and lifetime tech support
  • Check out ZEN30 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire cap, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire caps, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    SPECIFICATIONS

    • Z-Wave Frequency: 908.42 MHz (US)
    • Power: 120 VAC, 60 Hz
    • Z-Wave Chip: 800 Series (800LR only)
    • Maximum Load for Dimmer: 75 W LED, 250 W incandescent (don't use with tube lights, chandeliers, switched receptacles, or fans)
    • Maximum Load for Relay: 15 A
    • Z-Wave Range: Up to 100 feet line of sight
    • Operating Temperature: 32-104° F (0-40° C)
    • Dimensions: 1.7" x 4.1" x 1.1"
    • Installation: Indoor use only

      RESOURCES

      Download the Manual for Zooz Z-Wave Plus S2 Double Switch ZEN30 800LR (PDF)

      ZEN30 Frequently Asked Questions

      Advanced Settings

      Support Portal

      WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • Home Assistant (works best with device specific code, install here)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Hubitat (2.1.8 release or higher)
      • ISY
      • openHAB (2.5.1 or higher)
      • SmartThings (custom lua driver recommended, download it here)
      • Wink and Wink 2 (no advanced settings, add as Generic Z-Wave Switch)

        NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

        HOW IT WORKS

        You asked, Zooz answered! One part light dimmer, one part 15A on/off relay, this Double Switch has endless use cases. Make it your go-to Z-Wave solution for existing stacked switches controlling a ceiling fan and lights on the fan. If you have two switches that control a fan and light separately (2 connections coming into the box, 1 for the motor and 1 for the light), use the Double Switch to combine them!

        You can also use this device to control two sets of lights with one switch (one dimmable, one on/off), saving space in your box for another application. Or skip on the load for either the dimmer or relay, and use the Double Switch as a remote control for other scenes and devices in your Z-Wave network.

        Besides fan control, the 15 A relay in the Double Switch is a dry contact that can be used in a variety of creative applications. Use it to add Z-Wave to an outlet receptacle or load from a different circuit.

        The Double Switch supports OTA firmware updates so you’ll be able to take advantage of Zooz’s frequent upgrades and feature additions. And once added to your Z-Wave hub, the Double Switch will immediately start boosting Z-Wave signals to strengthen your connections and extend the range of other devices. It supports the newest S2 authenticated security protocol for secure communication, and its Z-Wave Plus 700 series chip ensures stable connections with your hub.

        INSTALLATION

        Please follow the manual carefully and refer to the supplied diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.

        Check for neutral connections BEFORE you buy. A white wire from a 14-3 romex is usually NOT a neutral. Ask us if you're not sure what to look for, we'll be happy to help!

        Zooz Z-Wave Plus S2 Double Switch ZEN30 Wiring Diagram

        How to include the Z-Wave Plus S2 Double Switch to your smart home hub?

        1. Make sure the switch is installed within range of your Z-Wave network
        2. Put your Z-Wave hub in inclusion/pairing mode
        3. Tap the upper paddle of the dimmer 3 times quickly to finalize the inclusion process
        4. A new dimmer and on/off switch will appear on your controller's device list

         NOTE:  If you can't match your wiring with any of the diagrams included in the manual, let us know and we'll walk you through the wiring process.

        Customer Reviews

        Based on 127 reviews
        87%
        (110)
        11%
        (14)
        2%
        (3)
        0%
        (0)
        0%
        (0)
        D
        Dan B
        Also a nice little scene controller

        nice option to make the button also a scene controller

        D
        Doug Peters
        used in bathrooms

        would be great if they made a non-dimmer variant specifically for bathrooms but it is still fine. as a light and single speed fan use, these are perfect for bathroom installs.

        N
        Nick G
        Great Combo Switch!

        I purchased a pair of ZEN30 switches to use in my home. I installed them such that the relay controls an overhead fan unit and then set up the dimmer as a scene controller to control other smart bulbs in the room. The degree of customizability is great and it integrated well into Home Assistant. Inclusion into Z Wave JS UI was a breeze. Highly recommended.

        V
        VOLODYMYR GAPON
        Zooz

        Zooz product are the best, good customer support, good price

        C
        Chris J
        Great unit

        I have 6 of these in the house and they work perfectly ! Smartest House is always prompt with processing and shipping. Will be purchasing much more from them !