Zooz Bypass Accessory for Smart Dimmers

$6.95 $12.95

| /

REDUCE FLICKERING

PRODUCT HIGHLIGHTS

  • Install the bypass accessory between your smart dimmer and the connected load to reduce flickering for selected LED bulbs
  • Pigtail wires included for quick installation

HOW IT WORKS

Connect the bypass between the light (load) and your Z-Wave dimmer to eliminate the flickering effect which may occur with incompatible LED drivers.

INSTALLATION

 NOTE: Always turn the power off at the breaker when handling 120 V installations. 

1. Connect the bypass according to the appropriate wiring diagram, making sure that your smart dimmer is already installed according to the instructions and fully functional.

2. Isolate all bare wires and/or terminal screws with electrical tape to minimize risk of accidental electrical short.

3. Carefully arrange the bypass and smart dimmer along with all wires back in the electrical box.

IN THE BOX:

SPECIFICATIONS

  • Power: 100-240V~, 50/60Hz
  • Operating Temperature: 32-104° F (0-40° C)
  • Installation and Use: Indoor only

Customer Reviews

Based on 9 reviews
67%
(6)
22%
(2)
0%
(0)
11%
(1)
0%
(0)
M
MK
Get the flicker out

Helps get the flicker out of led bulbs used in dimmers.

R
Rick
Good product

good complement to solve flickering

A
Anton R.
Review

It worked for us

k
kevin m.
Great little gadget!

A cheap and little device to fix a light flickering issue.

S
Stephen P.
Handy little component to keep on hand

From the years of tinkering with smart gear for my house, Ive ended up accruing a lot of different dimmers, bulbs, lights, etc. Occasionally I've run into combinations of bulbs and dimmers that don't work smoothly and flicker at certain brightness levels. Adding one of these little components into the wiring setup usually fixes my issue. Totally worth picking up one or two to keep on hand, especially when marked down to 7 bucks