$28.95 $39.95
| /
NOTE: You'll need a dedicated PC/laptop/Raspberry Pi and Z-Wave home automation software (sold separately) to install this product.
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency/region as your end devices when buying Z-Wave controllers to include products to your system without issues. If you're not sure which frequency your devices use, please contact the manufacturers first. Here is what each option stands for:
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
Zooz 800 Series Z-Wave Long Range USB Stick ZST39 User Manual (PDF)
ZST39 Frequently Asked Questions
Connect the 800 Series Z-Wave Long Range Stick to a USB port on your PC, laptop, or Raspberry Pi. Use it with your choice of home automation software, including Home Assistant with JS Z-Wave integration, Indigo, and HomeSeer. Follow the instructions for your software provider as the set-up may be different depending on the interface and operating system. Note this product is designed for expert users only and requires at least basic knowledge of programming.
Home automation software is required to control and configure your Z-Wave network. Z-Wave product compatibility will depend on the software you choose so we recommend installing an open and proven smart home system with your 800 Series Z-Wave Long Range Stick for best results.
Connected perfectly with HA via synology nas VMM. Works great
I got the Zooz 800 Series Z-Wave Long Range USB Stick ZST39 LR today in the open box, since I was pretty confident of my abilities as an amateur Home Assistant administrator since I've been doing system admin for 30 years. I was not disappointed. I plugged it in and after I convinced my VM install of Home Assistant that it was actually there, I configured my T6-Pro thermostat on the Z-Wave network and they immediately paired and worked. Absolute banger. I would highly recommend this product to make your life easier.
Next stop: light switches!
The battery of my Aeotec Gen5+ Z-wave USB stick reached end of life and I replaced it with the Zooz 800. ChatGPT walked me through the update and It's working great with Home Assistant on a Raspbery4.
Upgrading from 700 to 800 series usb stick was easy using home assistant. Haven’t noticed any issues and hope to get better performance as I upgrade other devices around the house.
This was great to run all Z-wave products (e.g. roll down shades) with my home assistant set up. Easy to set up and works great.