Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR

$32.95 $37.95

| /



  •   Beta Release   This device may not be fully integrated with your hub at the time of purchase. You may need to update the firmware of the device after the purchase.
  • Dimming Z-Wave control for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs)
  • Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A
  • 700 series Z-Wave chip: more range, reliable coverage
  • Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags
  • Advanced settings to customize minimum or maximum brightness level and more*
  • Built-in signal repeater: keep your mesh network stable and your system fast
  • SmartStart and S2 authenticated security for a truly protected smart home
  • Installs behind the existing wall switch or at the fixture (check your wiring first and always follow the diagrams in the manual)
  • Pigtail wires included for quicker set-up
  • 5-year extended warranty when registered and tech support forever

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.


    Before installing, make sure your fixture uses a 0-10 V dimming driver which doesn't exceed 4 Amps. Check your wiring first to confirm that you have all the following wires present in your electrical box: both 0-10 V driver connections, power, neutral, and load connection to power the LED driver, as well as a connection to a wall switch.

    If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

    Zooz 0-10 V Dimmer ZEN54 Wiring Diagram

    Here are some helpful wiring tips:

      • Make sure the gang box you are about to install the switch has power with neutral wire available - you will not be able to get the ZEN54 Dimmer to work without a neutral wire.
      • Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

    How to include the 0-10 V Dimmer to your smart home network?
    1. Put your Z-Wave controller in inclusion/pairing mode (or scan the QR code on the ZEN54 if your hub supports SmartStart)
    2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process
    3. A new dimmer switch should appear on your hub's device list


    • Z-Box Hub (recommended for Zooz products)
    • Ezlo Plus (no access to advanced parameters on Android app)
    • Ezlo Secure (no access to advanced parameters on Android app)
    • Home Assistant (Z-Wave JS)
    • HomeSeer
    • Hubitat (custom driver needed)
    • SmartThings (Edge driver needed)
    • Vera

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


      • Z-Wave Frequency: 908.42 MHz (US)
      • Power: 120-240 VAC, 50/60 Hz
      • Maximum Loads: 4 A, 480W at 120V, 960 W at 240V
      • Maximum A rating: 200 mA
      • Z-Wave Range: Up to 300 feet line of sight or up to a mile with Long Range enabled)
      • Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
      • Operating Temperature: 32-104° F (0-40° C)
      • Installation: Indoor use only


        Download the Manual for the Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR (PDF)

        Advanced Settings

        Support Portal

        Next Previous

        Customer Reviews

        Based on 1 review Write a review