Zooz 800 Series Z-Wave Long Range DC Signal Sensor Packshot Image

Zooz 800 Series Z-Wave Long Range DC Signal Sensor Smoke and CO Notifications

Zooz 800 Series Z-Wave Long Range DC Signal Sensor Notifications

Zooz 800 Series Z-Wave Long Range DC Signal Sensor Action

Zooz DC Smoke Detector ZEN55 Promotional video

YouTube video from DIY Smart Home Guy showing how to use the Zooz DC Signal Sensor ZEN55 to make analog smoke detectors smarter.

Video showing the installation and automation of the ZEN55 DC Signal Sensor on Home Assistant

Zooz Z-Wave Plus Smoke and CO Detector Bridge ZEN55 800LR

$28.95 $44.95

| /

SAFE ALERTS

PRODUCT HIGHLIGHTS

Quick reports to your hub for low-voltage trigger signals from your interconnected hard wired smoke and CO detectors by all major brands like First Alert, Kidde, and BRK (do NOT use with battery powered detectors)
Recognizes and reports both smoke and CO signals from interconnected hard wired analog detectors individually
NOTE: This is NOT a security alarm component and the device is NOT part of a life-safety system. Check local regulations before installing.
Optional 120 V relay to control lighting or a security siren
800 series Z-Wave chip: faster communication and more reliable network
Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags
Built-in signal repeater: keep your mesh network stable and your system fast (not applicable to Long Range installations)
SmartStart and S2 authenticated security for a truly protected smart home
Installs in any interconnected detector box; the last box is recommended as it has fewer wires (check your wiring first and always follow the diagrams in the manual).
Pigtail wires included for quicker set-up
5-year extended warranty when registered and tech support forever

NOTE: Z-Wave gateway controller required - sold separately.

SPECIFICATIONS

Z-Wave Frequency: 908.42 MHz (US)
Power: 120-240 VAC, 50/60 Hz
Maximum Loads: 10 A
Z-Wave Range: Up to 300 feet line of sight (or up to a mile with Long Range enabled)
Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
Operating Temperature: 32-104° F (0-40° C)
Installation: Indoor use only

RESOURCES

Download the Manual for the Zooz 800 Series Z-Wave Long Range DC Signal Sensor (PDF)

Advanced Settings

Support Portal

WORKS WITH

Z-Box Hub (recommended for Zooz products)
Home Assistant (Z-Wave JS)
HomeSeer (with Z-Wave Plus plug-in)
Homey (Zooz App for Homey)
Hubitat (custom driver required)
Indigo (NOTE: no security, Indigo does not support S2 Z-Wave security)
SmartThings (Edge driver needed)

NOTE: If you don't see your Z-Wave controller on the list above, please ask the manufacturer of your Z-Wave hub about support for the ZEN55 before you purchase this product.

INSTALLATION

Check your wiring first to confirm that you have all the following wires present in your electrical box: power, neutral, and the connection to the detector.

If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

Here is an example diagram showing how to wire the ZEN55 to a smoke detector:

INSTALLATION TIPS

Use with any standard interconnect smoke and/or CO alarms.
Always turn off the power at the breaker before handling the wiring, this is a 120 V high-voltage installation.
The last detector in series will be the one that only has 3 wires coming into the box (vs 5 or more in other boxes). This is where you'll have the most space to install your smart device at. (NOTE: it can be installed in any box in the series; the last is recommended only because of space.)
When adding the ZEN55 relay to your hub, you may need to scan the QR code or enter the PIN code located on the back of the relay (if your system supports SmartStart). Read more about adding the device to your hub here.
Test the detector's alarm (follow the instructions for your unit) to see if the status of the device changes in your hub's interface once the alarm goes off. Remember to warn your family members or roommates when testing this!
Always turn the power off when securing the module and the detector back in the electrical box.
You'll need to create an automation in your hub for a notification to be sent to your phone or email once the status on the ZEN55 changes so you can immediately know if the alarm is triggered.

Rock solid

Delivered quickly, paired easily through Home Assistant, easy to install in the current smoke detector junction box without going into the attic. Very impressed!

Zooz Does it Again

I slept on Z-Wave products when I started my smart home. I thought Z-wave was a thing of the past, but since I discovered Zooz products, each devce I aquire and add to my home system has been reliable, easy to install, and fits the specific need I have. The ZEN55 800LR was no different. I was researching smart smoke and CO2 detectors. They were far and few, but what was available came in at a high price point. This was the best solution and was up to current building codes since they allowed me to keep my hardwire dsmoke detectors that had battery backup. The solution was so simple but very smart. another product that receives 2 thumbs up.

Easy to use product

Works as advertised. Reasonable price.

Smoke and CO relay

Works as expected like all zooz products i have.

Great addition to my smart home.

The device was very easy to install. I set the device up in Home Assistant to trigger a siren and turn on all the lights if smoke is detected.

1 2 3