Zooz 800 Series Z-Wave Long Range Q Sensor ZSE11 800LR | Motion, Temp, Humidity, Light

$35.95 $39.95

| /

Quick MultiSensor

The Zooz ZSE40 is a Z-Wave Plus certified device

PRODUCT HIGHLIGHTS

  • Security monitoring: get motion alerts sent to your Z-Wave hub whenever activity is detected
  • Climate control: use this sensor to trigger your smart thermostat or humidifier based on regular precise temperature and humidity readings
  • Smart lighting: program your Z-Wave switches and smart bulbs to come on when the Q sensor reports motion and lux levels below your preferred set point
  • Power it with 2 CR 123A batteries (included) or a micro USB cable (sold separately, scroll down to shop)
  • Works as Z-Wave signal extender when powered via USB (do NOT pair the sensor on USB cable and then switch to batteries)
  • NEW 800 series Z-Wave chip: more range for reliable wireless communication
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • SmartStart and S2 authenticated security
  • Advanced settings to customize your sensor
  •  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH WINK OR ALARM PANELS) 
  • Modern minimal design with a multi-directional mini mounting bracket
  • 5-year warranty (when registered) and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    GET ACCESSORIES

    10ft USB cable for the Zooz S2 Motion Sensor ZSE18   USB Power Adapter for the Zooz S2 Motion Sensor ZSE18   3ft USB Cable for the Zooz S2 Motion Sensor ZSE18


    WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • Fibaro Home Center 2
      • Fibaro Home Center Lite
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Hubitat
      • Indigo
      • openHAB
      • SmartThings Hub (register your product here to access the custom lua driver for advanced functionality)

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

      • Z-Wave Region: US / CA / MX
      • Z-Wave Chip: 800 series
      • Power: 2 CR123A battery (included) / micro USB (cabled not included)
      • Z-Wave Range: Up to 150 feet line of sight (or up to 1300 feet with Long Range enabled)
      • Motion Detection: Up to 20 feet
      • Humidity Detection Range: 0 – 100 %
      • Light Sensor Detection Range: 0 – 65535 lux
      • Operating Temperature: 32° – 104° F
      • Dimensions: 2.3” x 2.3” x 2.2”
      • Installation: Indoor Use Only

    RESOURCES 

    Zooz Z-Wave Long Range Q Sensor ZSE11 800LR Manual (PDF)

    Advanced Settings

    Support Portal


    Next Previous

    Customer Reviews

    Based on 30 reviews
    67%
    (20)
    23%
    (7)
    3%
    (1)
    0%
    (0)
    7%
    (2)
    M
    Michael Riebesehl
    Works Great After Tweaking

    I purchased the ZSE11800LR to replace an AEON Labs sensor that was very inaccurate and therefor difficult to trigger events. the Q Sensor was easy to add to my HomeSeer network and since it was plugged into usb power had to go to Zooz’s website to get advanced reporting parameters to set 60s intervals that were not included in the printed material.

    D
    David Hardin
    Responsive unit

    Haven’t had long enough to comment on battery life but no complaints so far. I like that the light level is in lux units instead of percent (previous model 4in1 sensor uses percent). Paired well with zooz 800 series z wave stick as expected. Gives all the telemetry I would expect to home assistant

    L
    Lance
    This sensor works great!

    I have no issue with range as this is in my garage and used to monitor temperature mostly, but the motion detector will be good for security monitoring.

    M
    Michael Brubaker
    Great all in one

    Great all in one sensor for my Home Assistant setup. Great price.

    B
    Benjamin Burns
    Works great

    I like the all in one sensor. I mostly got this because it's rare to find a light sensor. Pairing works fine. Good signal through a wall. I only use this plugged in, so no idea about battery life. Only complaint is that the usb port is recessed in a small space. I have an ergonomic plug that is only slightly larger than a normal cord and it absolutely will not fit; a regular cord works fine.