NOTE: You'll need a dedicated hardware and Z-Wave home automation software (sold separately) to install this product.
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your end devices when buying Z-Wave controllers to include products to your system without issues. If you're not sure which frequency your devices use, please contact the manufacturers first. Here is what each option stands for:
NOTE: You will need to disable Bluetooth when using this module and install it on pins 1-10 (including the 5V pins). Please keep that in mind when planning your hardware installation.
Connect the 800 Series Z-Wave Long Range GPIO module to your Pi or Home Assistant Yellow by following the hardware instructions. Use it with your choice of home automation software, including Home Assistant with JS Z-Wave integration. Follow the instructions for your software provider as the set-up may be different depending on the interface and operating system. Please note that the ZAC93 module is for expert users only and requires at least basic knowledge of programming and electronics for the best experience.
Home automation software is required to control and configure your Z-Wave network. Z-Wave product compatibility will depend on the software you choose so we recommend installing an open and proven smart home system with your 800 Series Z-Wave Long Range GPIO module.