$31.75 $46.95
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
Download the manual for the 800 Series Z-Wave Long Range Wall Remote ZEN37 800LR (PDF)
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
You can now order a Wall Remote with a custom etched faceplate from our partners at Domotinc! Just click on the image below to customize your device and order it directly from Domotinc. NOTE: custom etched plates are NOT included with your purchase on The Smartest House. Domotinc currently sells hardware version 1 of the ZEN37 (see product changelog here).
Simply use the provided triangle tool to open the Wall Remote, take out the pull-tabs from the battery slots to activate the device. Follow the instructions to integrate the device with your hub and install the base in a standard switch box or on any flat surface using the provided screw or adhesive tape. Finish the installation by attaching the wall plate to the magnetic base of the Wall Remote.
How to add the Wall Remote to your Z-Wave home hub?
1. Make sure the device is within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the top button of the Remote Switch 6 times quickly to finalize the inclusion process (or scan the QR code / enter the 4-digit DSK number printed on the back of the remote if using the new SmartStart method)
4. A new remote control / button controller device will appear on your hub's device list
I love the easy, quality, and functionality of all Zooz products. But I liked how this one particularly was re-charable via USB, had 4 buttons, and was easy to use.
I own a dozen of other Zooz products and they have always worked well but the ZEN37 is a different story. The buttons are very low quality. The top button is "sticky" and makes two clicking noises every time to press it. The other buttons are better but still not great. I also was unable to get the remote added to my Home Assistant. Other Z-Wave products would add right away with the QR code but this one does nothing. I contacted support they seem to be aware of the button pressing issue and offered me a refund, or to wait for the next hardware revision. I decided to wait for the new version. I need several of these remotes and I'm glad I only bought one to test first. I will wait for the revised version and if they correct the issues then I will update my review and purchase more of them.
Zooz 800 Series Z-Wave Long Range Wall Remote ZEN37 800LR (Battery Powered)
These are great for adding a switch where none was before.
These remote controls are so helpful. They can be mounted or pop off from magnetic mount to be used hand held. I had a bear pairing but only because I only half read the instructions on how to do a factory reset. 6 taps on lower right button. And then when it starts blinking another 6 taps. It installed perfectly after that. A note of caution is not to recharge the remote with usb c port with anything more than a 1 amp charger. The electrically powered scene switch with one powered on/off button and 4 smaller scene buttons is another great tool. I used a brother label maker to add labels to these switches so that other people could easily use the remote. I am using these with a Smarthings hub and a driver must be installed before including the switches. That was an easy thing to do by following the instructions. The feel of the button press is not the greatest and I find pressing on the middle of each switch with straight pushes works the best. Otherwise sometimes the button hangs a bit and you may only get a 2 tap vs an intended 3 tap. Hope you all have great successes.
