Zooz 800 Series Z-Wave Long Range USB Stick ZST39 LR

$26.95 $29.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

NEW 800 SERIES LONG RANGE!

PRODUCT HIGHLIGHTS

  • All NEW 800 Series Z-Wave Long Range radio USB stick: incredible signal, super secure, and fast network! Long Range available for US only 
  •  NOTE: Do NOT perform NVM backup from 500 series or 700 series Z-Wave sticks for this device, this feature is currently supported for devices on firmware  1.30 or higher, otherwise if you're on 1.20 or lower, NVM will brick the product . Please read this article before attempting a firmware update on your Z-Wave stick. If you purchased your Z-Wave stick on or after June 2024, it's already on the latest version so do not attempt an update.  
  • Expert users only: please note that this product comes with basic hardware support and does not include any tech support for the home automation software or host hardware you decide to pair it with
  • Updated command class library: build your Z-Wave software with confidence and support of all of the latest features
  • Supports S2 security and SmartStart
  • Long Range ready: as long as your home automation software and Z-Wave accessories support the new Long Range technology, you can make the most of your smart home with unbeatable reliability of direct hub-to-device communication (Z-Wave LR is available in US/MX/CA frequency only)
  • 800 Series Z-Wave Chip: get more signal coverage and improved performance even without the Long Range capability thanks to the latest generation Z-Wave chip
  • What you'll need: a dedicated computer and home automation software with mobile interface to build a Z-Wave hub using the ZST39 hardware (not included)
  • Up to a mile of range in open space for Long Range enabled devices
  • 5-year warranty extended warranty once you register your product and lifetime tech support
  • Check out ZST39 Frequently Asked Questions

    NOTE: You'll need a dedicated PC/laptop/Raspberry Pi and Z-Wave home automation software (sold separately) to install this product.

    Z-WAVE FREQUENCY

    This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency/region as your end devices when buying Z-Wave controllers to include products to your system without issues. If you're not sure which frequency your devices use, please contact the manufacturers first. Here is what each option stands for:

    • US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products)
    • EU/UK: 868.42 MHz (used primarily in Europe), Z-Wave Long Range is not supported for this frequency!

    INSTALLATION

    Connect the 800 Series Z-Wave Long Range Stick to a USB port on your PC, laptop, or Raspberry Pi. Use it with your choice of home automation software, including Home Assistant with JS Z-Wave integration, Indigo, and HomeSeer. Follow the instructions for your software provider as the set-up may be different depending on the interface and operating system. Note this product is designed for expert users only and requires at least basic knowledge of programming.

    Home automation software is required to control and configure your Z-Wave network. Z-Wave product compatibility will depend on the software you choose so we recommend installing an open and proven smart home system with your 800 Series Z-Wave Long Range Stick for best results.

    Specifications

    • Z-Wave Frequency: 908.42 MHz (US, CA, MX), 868.42 MHz (EU, UK): no Z-Wave Long Range
    • Power: 4.75-5.25 VDC
    • SDK: 7.18
    • Wireless Range: Up to 1 mile in open space with Long Range enabled
    • Operating Temperature: 14-104° F
    • Installation and Use: Indoor only
    • Dimensions: 2" x 0.8" x 0.3"

      RESOURCES

      Zooz 800 Series Z-Wave Long Range USB Stick ZST39 User Manual (PDF)

      ZST39 Frequently Asked Questions

      Support Portal


      Next Previous

      Customer Reviews

      Based on 38 reviews
      97%
      (37)
      3%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      N
      NickS
      Solid

      It took a few tries to get home assistant to recognize it through proxmox but once it was adopted I have had no issues. Can't wait to add some more devices.

      B
      Brandon L.
      Works!

      Homeassistant loves it, can't wait to add more stuff!

      A
      Antoinette Verdone
      Z Wave Stick

      Easy to use easy to install, came right on time!

      S
      Steve
      Reliable and easy to install

      Installed the Titan valve a month ago in my basement on the water main valve. Very easy to attach with no cutting or tools. Zwave easily connected to my IQPanel4 for Alarm.com but only shows up as a light switch. Decided to take the plunge and set up a Home Assistant hub with a Zooz 800 dongle and it has worked flawlessly. Upgrading firmware took some time to read instructions and install the HA plugins, but went smoothly. One Zooz 800 series leak sensor in two floors up in the laundry, the other in the kitchen, and the connection is solid. I like that the Titan works as a repeater too. Cheap insurance against water damage.

      R
      Ryan
      Easy to set up

      This made it easy to set up a Z-Wave network in Home Assistant