Zooz Z-Wave Plus S2 On / Off Wall Switch ZEN26 (White) USED: Final Sale

GARAGE SALE DEAL

  

PRODUCT HIGHLIGHTS

  • GARAGE SALE DEAL: Used condition, FINAL SALE (not eligible for return, exchange, or warranty), pre-tested and fully functional, may show dirt marks or scratches on the back or metal plate, the paddle is always clean. May come with side tabs removed. May not come in the original box.
  • MIXED INVENTORY: May come in VER. 1.0 (no scene control) or 2.0, with small or large LED indicator, in old Zooz white, or new Leviton matching white. You may receive different versions in the same order. All ZEN26 switches can be updated over the air to the latest version if you have a Z-Wave stick. Click here for instructions.
  • Manual and wireless on/off control for lights via Z-Wave
  • Simple Direct 3-Way & 4-Way: Still no add-on needed, but now you can use it in a 4-way or 5-way with load and line in separate boxes! Quicker and easier installation. (Neutral wire required)
  • White (no other color available)
  • Use with standard light fixtures only (NO fans, receptacles, or tube lights)
  • Instant on/off status reports
  • S2 security for hacker-proof smart home
  • Update firmware via OTA anytime in the future to keep your device up to date with latest technology
  • Smart LED indicator makes pairing and set-up more intuitive (now control the LED mode with 6 clicks of any paddle!)
  • Acts as a signal repeater to boost your Z-Wave mesh
  • Z-Wave Plus chip for better range and less latency
  • Restores status after power failure
  • Compatible with LED, CFL, and incandescent bulbs (NO fans)
  • Use a standard-size wall plate for single gang installations (wall plate not included)

    NOTE: Z-Wave gateway controller required - sold separately.

    INSTALLATION

    Please follow the manual guidelines and diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.

    Check for neutral wires BEFORE purchasing. One white wire from a 14-3 romex is NOT a neutral. Ask us if you're not sure about the wiring, we'll help quickly!

    Zooz ZEN26 wiring diagram

    How to include the Z-Wave Plus S2 On / Off switch to your smart home hub?

    1. Make sure the switch is installed within range of your Z-Wave network
    2. Put your Z-Wave hub in inclusion/pairing mode
    3. Tap the upper paddle of the switch 3 times quickly to finalize the inclusion process
    4. A new on/off switch will appear on your controller's device list

     NOTE:  Follow an appropriate diagram from the manual to wire the switch in a 3-way or 4-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.

    WORKS WITH

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

    • Z-Wave Frequency: 908.42 MHz (US)
    • Power: 120 VAC, 60 Hz
    • Maximum Load: 8 A, 150 W LED/CFL, 600 W incandescent
    • ETL Certified
    • Z-Wave Range: Up to 100 feet line of sight
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

    Customer Reviews

    Based on 42 reviews Write a review

    Related Items