Zooz Z-Wave Plus On / Off Wall Switch ZEN21 (White) USED: Final Sale


– Sold Out

| /

Notify me when this product is available:




  • GARAGE SALE DEAL: Used condition, FINAL SALE (not eligible for return, exchange, or warranty), pre-tested and fully functional, may show dirt marks or scratches on the back or metal plate, the paddle is always clean. May come with side tabs removed. May not come in the original box.
  • MIXED INVENTORY: May come in VER. 2.0 (no scene control or OTA updates) 3.0, or 4.0 with small or large LED indicator, in old Zooz white, or new Leviton matching white, may come with Zooz logo on paddle. You may receive different versions in the same order.
  • Manual and remote on/off control for lights and small appliances 
  • Unique Direct 3-Way Solution: no add-on switch needed, extra savings! (Neutral wire required, use in 4-Way only if direct connection to load and line are in the same box)
  • Restores on/off status after power failure
  • Can be associated with other Z-Wave devices by scheduling scenes and customizing events
  • Compatible with LED, CFL, and incandescent bulbs
  • Screw terminal installation - requires Line (Hot), Load, Neutral, and Ground wires
  • New and improved Z-Wave Plus 500 series chip for faster, stronger wireless connectivity
  • Built-in repeater that strengthens your Z-Wave network
  • Blue LED indicator to easily locate the switch in the dark and signal Z-Wave communication
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • UL-listed and Z-Wave Plus certified
  • 1-year warranty

    NOTE: Z-Wave gateway controller required - sold separately.


    Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for CFL's and LED's, or 1800W (15A) for resistive load. Check your wiring first to confirm that you have all the following wires present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

    If you are not comfortable identifying the wiring and completing the installation, please consult a licensed electrician.

    Zooz Z-Wave Plus On / Off Light Switch ZEN21 VER 2.0 Wiring Diagram for Single-pole Installation

    Here are some helpful installation tips:

      • Make sure the gang box you are about to install the switch at features a neutral wire - you will not be able to connect the ZEN21 switch properly without a neutral wire.
      • Unlike your regular electric switches, Z-Wave switches require particular wires to be connected exactly as indicated - line and load wires cannot be swapped as it often happens to the most experienced electricians.

    How to include the Z-Wave Plus On / Off switch to your smart home network?
    1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
    2. Put your Z-Wave controller in inclusion/pairing mode
    3. Tap the upper paddle of the switch 3 times quickly to finalize the inclusion process
    4. A new on/off switch should appear on your controller's device list

     NOTE:  Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches.


    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


    • Z-Wave Frequency: 908.42 MHz (US)
    • Power: 120 VAC, 60 Hz
    • Maximum Loads: 960W Incandescent, 150W LED and CFL bulbs, 1800W (15A) Resistive
    • Z-Wave Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

      Customer Reviews

      Based on 42 reviews Write a review

      Net Orders Checkout

      Item Price Qty Total
      Subtotal $0.00

      Shipping Address

      Shipping Methods