$12.95– Sold Out
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input for this feature to work.
Make sure the load you are about to connect does not exceed 960W for incandescent lights, 150W for LED's, or 1800W (15A) for resistive load. Review your wiring carefully and confirm that you have all of the following present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).
If you are not comfortable identifying the wiring and completing the installation, please consult a licensed electrician.
Here are some helpful installation tips:
How to include the Z-Wave Plus On / Off Toggle switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Toggle the switch UP 3 times as quickly as possible to finalize the inclusion process
4. A new on/off device should appear on your controller's device list
NOTE: Please use a dedicated wiring diagram to connect this switch in a 3-way setting with a regular electrical switch if you'd like to control one light with 2 or 3 switches.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.