Zooz Z-Wave Plus Dimmer Light Switch ZEN22 (White) USED: Final Sale


– Sold Out

| /

Notify me when this product is available:



  • GARAGE SALE DEAL: Used condition, FINAL SALE (not eligible for return, exchange, or warranty), pre-tested and fully functional, may show dirt marks or scratches on the back or metal plate, the paddle is always clean. May come with side tabs removed. May not come in the original box.
  • MIXED INVENTORY: May come in VER. 2.0 (no scene control or OTA updates) 3.0, or 4.0. with small or large LED indicator, in old Zooz white, or new Leviton matching white, may come with Zooz logo on paddle. You may receive different versions in the same order.
  • Manual and wireless control from your smart phone or computer (when synced with a Z-Wave gateway controller)
  • Direct 3-Way Solution: connects to an existing light switch for 2-point control, no special companion switch needed! (Neutral wire required, on/off control only from slave switch, use in 4-Way only if direct connection to load and line are in the same box)
  • White (no other color available)
  • Extended LED bulb compatibility - works with most popular dimmable LED's (including Cree, Ecosmart, Philips, GE, Sylvania, Sunco, and others. NOT COMPATIBLE WITH LUMINUS BULBS.)
  • Quick status reports to your hub when operated manually
  • Based on universal command classes - supported by all certified Z-Wave gateway controllers
  • Capable of advanced automation and association with other Z-Wave devices — schedule custom scenes and events
  • Upgraded Z-Wave Plus 500 series chip for stronger and faster wireless connectivity
  • Built-in signal repeater for a more reliable Z-Wave network 
  • Blue LED indicator to help locate the switch in the dark (now configurable straight from the switch!)
  • Fits a standard-size face plate for single and multi gang installations (face plate not included)
  • UL / ETL listed and Z-Wave Plus certified
  • 1-year warranty

    NOTE: Z-Wave gateway controller required - sold separately.


    Before beginning the installation process, make sure the load you are about to connect does not exceed 600W for incandescent lights or 150W for DIMMABLE CFL or LED. Check your wiring first and confirm that you have all of the following present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

    If you are not comfortable identifying the wiring and performing the installation, please consult a licensed electrician.

    Zooz ZEN22 VER 2.0 wiring diagram for single pole switches

    Here are some helpful installation tips:

    • Make sure the gang box you are about to install the switch at features a neutral wire - you will not be able to connect the ZEN22 switch properly without a neutral wire.
    • Unlike your regular electric switches, Z-Wave switches require particular wires to be connected exactly as indicated - line and load wires cannot be swapped as it often happens to the most experienced electricians.
    • Z-Wave dimmers will work best with incandescent and high-quality DIMMABLE LED bulbs with at least 15 Watts on load.

      How to include the Z-Wave Plus Dimmer switch to your smart home network?
      1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
      2. Put your Z-Wave controller in inclusion mode
      3. Tap the UPPER paddle of the switch 3 times very quickly to finalize the inclusion process
      4. A new dimmer (or multilevel switch) device will appear on your controller's device list

      NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches.


      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


      • Z-Wave Frequency: 908.42 MHz (US)
      • Power: 120 VAC, 60 Hz
      • Maximum Loads: 500W Single-gang, 400W Double-gang, 300W Triple-gang Incandescent, 150W CFL or LED
      • Range: Up to 100 feet line of sight
      • Operating Temperature: 32-104° F (0-40° C)
      • Installation and Use: Indoor only


        More wiring diagrams for 3-way and 4-way set-ups

        Customer Reviews

        Based on 71 reviews Write a review

        Net Orders Checkout

        Item Price Qty Total
        Subtotal $0.00

        Shipping Address

        Shipping Methods