Zooz Z-Wave Plus 700 Series Double Switch ZEN30 VER. 3.0 for Light & Fan Combo (Garage Sale)

– Sold Out

| /

Notify me when this product is available:

Product Condition (See full condition details below)

GARAGE SALE DEAL

DISCONTINUED PRODUCT:  SHOP THE NEW VERSION HERE

  

PRODUCT HIGHLIGHTS

  •  GARAGE SALE DEAL:  final sale, not eligible for return, exchange, or refund. 6-month limited warranty. This is the final part of our inventory, we will NOT be restocking this version in the future.
  • Z-Wave Plus Dimmer (up to 75 W LEDs and 250 W incandescent) and On/Off Relay in one
  • The first Z-Wave double wall switch!
  • Direct replacement for fan / light combo switches or other double switches in your home
  • VER. 3.0: 700 series Z-Wave chip, TRIAC dimmer with improved LED compatibility
  • DIMMER: double tap to full brightness, custom brightness level on, adjustable ramp rate and dimming speed, and more great features you've known Zooz for!*
  • RELAY: on/off control only, use it with ceiling fans or exhaust fans, built-in overload protection, dry contact relay for more creative applications, no load necessary so you can use it as a virtual switch or scene controller.
  • Scene Control (select hubs only): trigger up to 18 scenes or control up to 18 devices with multi-tap control.*
  • Smart bulb ready: use scene control or simple automation to easily program smart bulb control with this switch without cutting power to them
  • NO DIRECT 3-WAY: use in single pole set-ups only. Can be used in virtual 3-ways without any direct connections to the other switches in 3-way and 4-way installations. Contact us for details.
  • Adjustable LED indicator: choose from 4 colors and 3 brightness levels
  • Quick Installation: pigtail wires (wire nuts included), only 1.1" deep and no heatsink tabs for an easy fit
  • White (no other color available - currently no plans for other colors)
  • OTA firmware updates for a future-proof device
  • Built-in signal repeater to boost your Z-Wave network
  • Restores status after power failure
  • Air-gap switch for added safety
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • Check out ZEN30 Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

    PRODUCT CONDITION

    We may have this product available in an open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • OPEN BOX: like a new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included.
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, the battery may not be full, etc)
    • USED: used condition, may show signs of wear, may not include accessories (like product manual, wire caps, etc) or parts of the packaging; paddles are clean and don't show signs of wear.
     FINAL SALE:  not eligible for return, replacement, or refund. Limited 6-month warranty.

    INSTALLATION

    Please follow the manual carefully and refer to the supplied diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.

    Check for neutral connections BEFORE you buy. A white wire from a 14-3 romex is usually NOT a neutral. Ask us if you're not sure what to look for, we'll be happy to help!

    Zooz Z-Wave Plus S2 Double Switch ZEN30 Wiring Diagram

    How to include the Z-Wave Plus S2 Double Switch to your smart home hub?

    1. Make sure the switch is installed within range of your Z-Wave network
    2. Put your Z-Wave hub in inclusion/pairing mode
    3. Tap the upper paddle of the dimmer 3 times quickly to finalize the inclusion process
    4. A new dimmer and on/off switch will appear on your controller's device list

     NOTE:  If you can't match your wiring with any of the diagrams included in the manual, let us know and we'll walk you through the wiring process.

    WORKS WITH

    • Z-Box Hub (recommended for Zooz products)
    • Home Assistant (works best with device specific code, install here)
    • Hubitat (2.1.8 release or higher)
    • ISY
    • openHAB (2.5.1 or higher)
    • SmartThings (custom lua driver recommended, download it here)
    • Wink and Wink 2 (no advanced settings, add as Generic Z-Wave Switch)

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

      SPECIFICATIONS

      • Z-Wave Frequency: 908.42 MHz (US)
      • Power: 120 VAC, 60 Hz
      • Z-Wave Chip: 700 Series
      • Maximum Load for Dimmer: 75 W LED, 250 W incandescent (don't use with tube lights, chandeliers, switched receptacles, or fans)
      • Maximum Load for Relay: 15 A
      • Z-Wave Range: Up to 150 feet line of sight
      • Operating Temperature: 32-104° F (0-40° C)
      • Dimensions: 1.7" x 4.1" x 1.1"
      • Installation: Indoor use only

        RESOURCES

        Download the Manual for Zooz Z-Wave Plus S2 Double Switch ZEN30 (PDF)

        ZEN30 Frequently Asked Questions


        Customer Reviews

        Be the first to write a review
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)